Roe Blower with Nitrous??

[RedEnuf93]

I just installed the Roe with 8lbs pulley.
I have the NX system still in the car and eventually will be spraying the beast a bit...

Where have you hooked up your NX (smooth tubes?)and what is the shot you are using. Are you using a dry shot??

Since the car is in pieces I thought its good time to run the plumbing, even if I am not going to spray it until its been dynoed.

Any pictures of the setup would be GREAT!!


Thanks!!

 

[JUCD VPR]

I don't have the Super charger yet but i do have Nitrous on my Viper. I went with putting them in the smooth tubes. Theres pics in my gallery if your intrested in looking how its set-up.

 

[Shelby3]

I have a wet setup with the jets in the wheel sides of the smooth tubes. Water/**** nozzles are plumbed in the inside of the smooth tubes. W/M is a must if you are running the Roe. My nitrous is not controlled by the VEC 2 so I don't have to change programs to run it. I pick up 250 foot pounds of rwtq on the juice. All my solenoids are mounted under the oil cooler so there's not much to see in the way of a picture.

 

[plumcrazy]

call mike figlozi at snake pit performance, he had a nice setup on his partners car if i remember correctly.

631 845 8199

 

[RedEnuf93]

call mike figlozi at snake pit performance, he had a nice setup on his partners car if i remember correctly.

631 845 8199

I have already 2 NX sets... One on the car and more solenoids as back ups..
Hey, I could always do the Honda thing, hook up only the purge!!

 

[2MANYTOYS]

I have a wet setup with the jets in the wheel sides of the smooth tubes. Water/**** nozzles are plumbed in the inside of the smooth tubes. W/M is a must if you are running the Roe. My nitrous is not controlled by the VEC 2 so I don't have to change programs to run it. I pick up 250 foot pounds of rwtq on the juice. All my solenoids are mounted under the oil cooler so there's not much to see in the way of a picture.

Wasn't yours in the superduper hiding place??