Search results

  1. GTS Dean

    Just bought K&N Viper (Jerry Mall?)

    Dan Cragin would probably know something about the car. Have you contacted K&N directly to inquire?
  2. GTS Dean

    Viper gts 1996 won’t start

    Connect a fuel pressure gauge at the Schrader valve on the intake manifold. It could be a plugged fuel filter in the left rear wheel well. Maybe the regulator is bypassing back to the tank? That would heat the fuel and cause vapor to try and push to the engine compartment. Carefully check the...
  3. GTS Dean

    Viper gts 1996 won’t start

    There is nothing magical, or mystical about the very early Chrysler OBD-2 JTEC engine controller. It is about as simple as they come. If you have the correct manuals and someone with competency in English and fundamental electronic diagnostic skill, this can be solved. Your $4500 should have...
  4. GTS Dean

    PCV Grommet alternatives?

    Tag says:0476 3806 AC
  5. GTS Dean

    PCV Grommet alternatives?

    Your Dodge dealer can still get this entire assembly for about $20.
  6. GTS Dean

    Gen1 interior trim screws?

    For the early Vipers - all the engine fasteners are US threads. With rare exception, all the rest of the body and frame fasteners are metric.
  7. GTS Dean

    1996 RT/10 - fuel filter replacement

    That fuel inlet line is pretty boogered up from previous attempts. I really struggled with my GTS filter a year ago. A good bit of sandy grit had accumulated in it and the line wouldn't release. Ended up using air, brake cleaner, then WD and kept working at it until it released. Access is very...
  8. GTS Dean

    Gen 2 fuel pressure regulator needed.

    Dodge Viper fuel system shenanigans PART 1/2 - YouTube Part 2 is where it gets interesting.
  9. GTS Dean

    Still Loving my 2000 RT/10 after over 20 yrs

    Dang luc - good to see you're still out there Vipering!
  10. GTS Dean

    Door Hinge Wires

    This is true. However, the connectors are common modular corporate models of a given configuration and pin count. A takeout could have enough conductor length and count to utilize unstressed OE conductors. Pins can be swapped in the housings pretty easily. Just a few thoughts for...
  11. GTS Dean

    2013 GTS Stryker, 1 of 62

    Congratulations on a great sale!
  12. GTS Dean

    Dealer tools

    An 18mm crowfoot line wrench is just about mandatory for the hydraulic lines at the steering rack.
  13. GTS Dean

    How to replace an IAC motor on a Gen 1

    I'd do a throttle cable synch just to eliminate another possibility.
  14. GTS Dean

    Door Hinge Wires

    It's possible that the harness was used for another car in the corporate lineup. It would be nice to know what it might have been...
  15. GTS Dean

    PCV Grommet alternatives?

    Your car's grommet has a plastic n ipple inside it to connect an extension hose to the pcv valve. Otherwise, it is standard Mopar. Pop the old grommet out, cut it to get at the n ipple and swap it to the new one. In the photo below, I was tinkering with a larger vent hose idea.
  16. GTS Dean

    PCV Grommet alternatives?

    Here's a very carefully kept secret: the Chrysler Corporation has used EXACTLY THE SAME PCV GROMMET FOR ALL ENGINES SINCE 1967. Shhhhhhh!
  17. GTS Dean

    Fuel pressure reg needed

    How old is your fuel pump? I'd put more money on that as the source of your problems than a regulator that only has a spring in it unlikely to fail. That's been my experience.
  18. GTS Dean

    Door Hinge Wires

    Yes, the door wire harness s ucks a root. Next time you are working on the interior panels, it's very helpful to use a pick to probe around thru the outer hole and help locate/align the blind hole behind it. Start with the ones that are easiest and the remainder will pretty well self-align.
  19. GTS Dean

    Gen1 interior trim screws?

    Auveco is a great place to start looking. https://www.auveco.com/chrysler/8-x-1-2-phil-flat-top-washer-hd-tap-screw-black-16478 Also C & F https://www.clipsandfasteners.com/default.asp
  20. GTS Dean

    Wanted water pump 2000 Gen-2 Viper

    True.
  21. GTS Dean

    Gen 2 overheating in Texas sun… go figure

    Those are 3 piece CCW race Classics. Lots of components available to optimize your width and offsets.
  22. GTS Dean

    Gen 2 overheating in Texas sun… go figure

    Thanks for the update. Most unfortunate about the gas cylinder. Did it just pop loose from the ball stud on the glass and whack a panel?
  23. GTS Dean

    Looking for a gen 2 water pump.

    Only a very small group of Viper owners/enthusiasts are offering this service. Some owners are finding a way to do it themselves.
  24. GTS Dean

    30 years a Viper owner

    That's it in my avatar - with me driving! It is 27 now.
  25. GTS Dean

    30 years a Viper owner

    It was a very happy (and HOT) August 14, 1993 for me. My third child had been born a little over a week before, then my gleaming Black '93 RT/10 hit the streets of New Braunfels and San Antonio WITH air conditioning! Lord that car was beautiful - and fun to drive on the track. I traded it 3...

Latest posts

Members online

Total: 1,047 (members: 10, guests: 1,037)

Forum statistics

Threads
153,839
Posts
1,686,669
Members
18,448
Latest member
JpKL

Share this page

Top