Search results

  1. S

    GARAGE FLOOR - I USED VCT - I RATE IT A 9.5 PICS

    Thanks for the input. I assume these tiles are self adhesive, or do you need to use some type of glue to secure them? Also, are these tiles pliable or very hard? Thanks again.
  2. S

    Should you let your Viper engine idle to warm up?

    HAving Gen 1 here is what I do: Start it up and let it idle til the coolent temp. guage moves ever so slightly-usually a couple minutes. Then I drive at low rpm until the oil pressure guage steadies-about 10-20 minutes of driving depending on outside temp. Since I have no oil temp. guage I use...
  3. S

    Most durable tile flooring for garage??

    Thanks for the input. Yes I have experience with the epoxy paint, and IMHO it sucks. I was looking at doing some sort of tiling. My floor is wet poured and leveled, so all I would need to do it clean and prep it. I am thinking abouth either Ceramic tiling it or doing the type of tiling like...
  4. S

    Most durable tile flooring for garage??

    Inspired by PattyMelt and planning on doing my garage when the weather warms, I was wondering if people could give me input on flooring. I am looking for some thing stylish but obviously I want it to be very durable. Remember, here in PA. the floor will be subjected to salt and the elements as...
  5. S

    Finished out my Viper/Corvette Z06 Garage Project!

    Looks great man! I am going to do my 3.5 bay this summer. Congratulations!!!
  6. S

    Anyone have a clear bra or invisibra on their car?

    I had my whole front end and mirrors done along with the first quarter of the rockers. The guy used 3M and free handed it. He is a local guy in my area that specializes in this, and he does all top end cars. I paid $400 and the job is flawless. I will do all my cars in the future. I truely...
  7. S

    Hen Venom info

    Thanks a lot for the post! Not sure how much of this applies to my 94 Venom 500 as some of the things mentioned are not on my car-big surprise! LOL but I appreciate it!
  8. S

    I have a Hen car

    Ya, all I can verify is the smooth tubes and K&n's. It also sounds like it has hi flow cats or no cats-it is extremely loud! It does have the dash badge and Venom stickers under the Viper stickeers. No headers and I have never had the valve covers off to check the rockers. I will say the car...
  9. S

    I have a Hen car

    I have a 94 Venom 500. I love the car but have been unable to obtain info as to what was modified by Hen. If any one knows what makes it a Venom 500 please let me know!
  10. S

    Heatproofed my sills today

    Love the Moto Guzzi! Awsome machines!
  11. S

    is there a big difference in non abs cars?

    I think ABS is way over rated, unless you never drove a non ABS car I guess. Non of the cars I had growing up were ABS so maybe I'm biased. If I had my choice all the cars I buy would be non ABS and non traction control. In my opinion these 'aids' as they call them are more of a hindrance. Maybe...
  12. S

    GEN 1 guys looking for a real cheap hard top here it is....

    Just out of curiosity how does this top latch in the front? I have an AutoForm top but I don't understand how the Mopar top attaches.
  13. S

    how cold out is it before you garage?

    As every one said, just be careful with the tires! I try to get my cars out atleat every 2 weeks even in the winter just to keep the fluids moving. I have never 'stored a car' I drive them.
  14. S

    Gen 2 1/2 Pics

    Hot man!
  15. S

    Need rotor and brake pad suggestions real fast!

    If you really don't drive hard you can get a set of 4 cross drilled and slotted off eBay for under $200.
  16. S

    Anybody know who bought this car?

    Nice ride. Burn the wing.
  17. S

    Adjusting am Auto Form hard top?

    Thanks guys. Tony I will call you ASAP-thanks for the offer!
  18. S

    A very dumb driving question....

    Well it really depends. If you are full out racing you really don't want to down shifts while in the Apex of a turn as you will load the front end and the under steer could cause you to lose traction. YOu are better off setting up before you enter the turn, as the old saying "carry your speed...
  19. S

    Adjusting am Auto Form hard top?

    I have an Auto Form hard top for my 94. When looking at it from the rear it deffinately sits a bit crooked-there is more over hang to the right. Is there any way to adjust the fit of these tops? This is my first time putting it on the car so I don't want to mess any thing up. Any tips would be...
  20. S

    What a beautiful site

    Wow, sweet man! Let me know next time! I'm about 1.5 hours out of Harrisburg!
  21. S

    wher is most reasonable place to get emblems?

    Just wanted to update every one that Emagineit just gave me a refund. Took a bit but I wanted to be truthful.
  22. S

    wher is most reasonable place to get emblems?

    I ordered one from emagineit Inc. After sending me the wrong color yellow I returned it and asked for a refund. After waiting 3 months a 2 e mails I have yet to get my money back, which by the way was over $86.00! Talk about a rip off. My next step is to call the credit card company and file a...
  23. S

    Is your mechanic cheating you?

    I had a friend who use to work at Jiffy Lube when we were in high school (I'm 38 now). He use to tell me all the time how no one would ever do the work and they would be charged for all kinds of things that never took place. Guess that's why I always take my cars to a reputable place and always...
  24. S

    1996 for $37,500~

    Looks like a nice clean car at a great price! Lhttp://cgi.ebay.com/ebaymotors/Dodge-Viper-VIPER-RT-10-LOW-MILEAGE-VIPER-RT-10-ROADSTER-PERFECT-CONDITION_W0QQcmdZViewItemQQcategoryZ6209QQhashZitem150051267621QQihZ005QQitemZ150051267621QQrdZ1ooks like a nice clean car at a great price!
Top