Search results

  1. M

    Kenne Bell 3.6 ltr Blower

    Eddie, I always kept the stock half shafts as my fuse, or weak link, in the drivetrain. I figured its easier and cheaper to replace a half shaft rather than the rearend or trans. With better tires, you may risk breaking if you get wheel hop. Funny thing is the car never really suffered from...
  2. M

    Gen 1 ... more power

    I need to get down there at go for a ride one of these days.
  3. M

    Kenne Bell 3.6 ltr Blower

    Still the stock clutch, which held up pretty well in my opinion. I debated on throwing in a new lightweight flywheel also, but never pulled the trigger. Get that thing to the strip and see what she does;)
  4. M

    1994 RT/10 - StopTech Brake Install

    Great job Eddie, car looks awesome!! I want to know more about the chip also:D
  5. M

    Kenne Bell 3.6 ltr Blower

    It will also eat up 600cc sport bikes, that red car runs pretty well:D
  6. M

    Gen 1 ... more power

    Eddie, Joe gave me the flow numbers when he did the heads, just cannot remember what they were. They were not as good as Greg gets with Gen 2's, but within about 3% I believe. I think the cam was just a tad over .600, 232/236 duration on a 114 I think. With more fuel, bigger intake and...
  7. M

    95 viper fuel pump

    Labor charge is crazy, I did my gen 1 pump and it was not hard at all. Get the car up in the air, grab a few cold ones, and go at it.
  8. M

    Winter Blues

    I generally use the winter down time to fully clean and detail the car, frame, wheelwells, engine, paint, interior. Its almost as enjoyable as driving it, and helps the winter to pass a little quicker. Next year I may just do Greg Good heads and cam over the winter, in which case I will look...
  9. M

    Tuning Resources?

    You have an a/f guage Jason? I honesly didn't notice much difference going from 85 outside to 45. Leaned out a tad, not much though.
  10. M

    rubber elbows on valve covers-Gen 2

    Thanks Chuck!!
  11. M

    rubber elbows on valve covers-Gen 2

    finished the project, took about 15 min total time, biggest pain was taking out the hard tubing, had to remove the IAC, otherwise piece of cake. tomorrow I remove the side sills, clean and wax em, re-install and then she comes down off the jack stands. Cannot wait for spring!
  12. M

    rubber elbows on valve covers-Gen 2

    I will make my own harness, nothing but hose and a few fittings, simple solution and I will use rubber hose that will withstand synthetic oil. Something to do tonight!
  13. M

    rubber elbows on valve covers-Gen 2

    Need to replace the 90 degree rubber elbows coming out of the valve covers on my 01 GTS. I would like to get them asap, anyone had any luck finding these at a local retail store, or do they have to be ordered? I looked a little today, no luck. Didn't think it would be a hard item to find...
  14. M

    B/W in St Louis

    Didn't see a wing Redsnake, looked stock to me.
  15. M

    B/W in St Louis

    Saw a strange site while heading east on 64 in St Louis yesterday, a viper on the road during winter!! Anyone on here? Car looked very nice. marty
  16. M

    2001 Z06

    stock vs stock, you will have no issues, BUT the LS engines are easy and cheap to upgrade, and they run very well when modded.
  17. M

    Too good to be true?

    The hood on the drivers side looks like its resting on the side sill, something just doesn't look right about the car.
  18. M

    Thanks Sean

    Sean's level of customer service is outstanding. He has helped my MANY times over the phone on a Saturday or Sunday. martyb
  19. M

    2001 Sapphire GTS for sale

    You did very well to get 75K for both cars, congrats.
  20. M

    small rubber piece on bottom of starter

    Thanks again!
  21. M

    small rubber piece on bottom of starter

    Thanks Chuck!! It seems to have a small plastic clip to hold it in place, which broke on my part. I ended up putting a dab of RTV on it and re-installing. Next time I am under the car, well have to see if it worked! If not, can that part be purchased, or would I need to buy an entire starter?
  22. M

    Alpine Stereo install

    Not plug and play Redsnake, just went through this last fall. I tried to do it myself, ended up taking it to a pro, had him add alpine sub, alpine amp, alpine speakers, yada yada yada. I spent 5 times more than I set out to, but it was well worth it.
  23. M

    small rubber piece on bottom of starter

    yup, thats the piece I am referring to. I suspected it was a drain of somesort, just didn't know if I could drive the car in the rain without it. I may just put a dab of RTV on it, put in back on the starter and call it a day.
  24. M

    small rubber piece on bottom of starter

    nobody? I have to think someones run across this before.
  25. M

    small rubber piece on bottom of starter

    Can someone tell me what the small 1" rubber piece on the bottom of the start is? I knocked it off, and the plastic clips that hold it in seem broken. Do I need it and if so, can it be purchased?? Thanks all, martyb

Latest posts

Members online

Total: 961 (members: 2, guests: 959)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top