Search results

  1. R

    What controls your idle on the viper?

    Just like mentioned above, clean thottle bodies, synchronize cables. If this does not solve the problem, turn the set screws on the throttle bodies 3/8 to 1/2 turn. I had to remove the throttle bodies to adjust mine. This solved my idle stumbling and low idle problem. :usa:
  2. R

    cd/slotted rotors on Ebay

    I purchased the rototech rotors as well last year. Very satisfied! :usa:
  3. R

    Low Profile Race Jack

    That is exaclty like the one I purchased from Sam's Club only it was dark blue.
  4. R

    Advice on High Flow Cats

    I have the Roe Racing HF round cats and 3" stainless side exhaust. Unbelievable sound improvement, much louder and absolutely no side sill or footwell heat problems. Give Sean a call! :usa:
  5. R

    Transmission - Dexron III or Gear Lube

    AMSOIL 75W-90W made a big difference in shifting smoothness. However, when it is below 40 degrees, the shift to 2nd gear requires a little more finness and paitence until the car warms up. I shift from 1st to 3rd with no problem until the car is warm. Dodge dealer viper technician recomended...
  6. R

    Low Profile Race Jack

    I recently purchased the low profile racing jack from Sam's Club. Outstanding quality for the price and fits under the car with a 1" to spare! :usa:
  7. R

    Anyone use autovation billet pedals?

    I just received my RT/10 pedals from autovation. The quality is excellent. Can't wait to install.....once it warms up a bit! :usa:
  8. R

    Detroit Auto Show

    Go to Greek town for the BEST DEEP DISH CHICAGO STYLE PIZZA at "Pizza Pappolas". Better than the deep dish pizza we had in Chicago last summer!
  9. R

    Brake rotors/Brake pads

    For pads, go with the EBC greens for street use. I noticed no difference in stopping power and almost zero dust. :usa:
  10. R

    Super Charger - Which type is best?

    What are the pros & cons of a twin screw SC that mounts on top of the engine vs. a paxton type SC that mounts in front of the engine? Which produces more power, heat, ease of installation and removal, etc.? :usa:
  11. R

    MUFFLER?

    0808 Motor City Viper Member. If you want to make a trip to Novi, I would be more than happy to let you listen to my 95 with the Roe System. Make the decision yourself. Shoot me an e-mail on [email protected] if you are intersted. :usa:
  12. R

    MUFFLER?

    I purchased the Roe Racing HF round cats and 3" stainless side exhaust system. Unbelievable difference in sound and the heat problems are only a memory. I liked the Roe system so well, I decided to sell my OEM cats and muffler assembly on EBAY which covered about 1/2 the cost of my new system...
  13. R

    SANTA CAME EARLY BRINGING RAIN

    Classic example of "timing is everything". We have over 3" of snow today and still coming down. Wouldn't have it any other way on Christmas day! :usa:
  14. R

    SANTA CAME EARLY BRINGING RAIN

    Santa came early this year and brought plenty of rain to wash the salt off the Michigan roads. Can't think of a nicer Christmas gift to one's self than driving the viper! Merry Christmas to All! :usa:
  15. R

    THANK YOU SEAN ROE

    Sean.....if you are tuned in, please advise when the Gen I SC status and when it will be available. :usa:
  16. R

    Must read- Great oil analyis study !

    This last year, I switched to Amsoil for the entire drive train. The Amsoil website (amsoil.com) shows specific comparisons to other synthetics, i.e., Mobil 1. Understanding that their stats may be biased, and as a long time customer of Mobil I, I e-mailed Mobil 1 for information on their...
  17. R

    Welding High Flow Cats

    JimT, My local Tuffy Muffler shop welded my side exhaust in place that I purchased from Roe Racing.....$35 This is the only way to go. Good luck! :usa:
  18. R

    fuel filter change - how often?

    How often should the fuel filter be changed assuming that there has not been a problem with dirty fuel? :usa:
  19. R

    Hey Sean, how about an update on the intercooler!!!

    Sean, what is the status of the Gen I supercharger? :usa:
  20. R

    cold storage

    Cold Storage in Michigan. I place a rubber floor mat underneath the car to keep the moisture down. Carpet squares over rubber mats under the tires in addition to raising the air pressure in the tires to 40 psi to reduce flat spotting. Fill the tank with gas. I drive the car whenever there...
  21. R

    Gen I Head Tourque specification???

    How do you end up at 95 pounds with only a 1/4 turn after tourqing to 30 ft. lbs??
  22. R

    Power Steering Fluid squirting under the hood at the Las Vegas Road Course

    EVERY VIPER OWNER SHOULD PAY VERY CLOSE ATTENTION TO THIS THREAD. If you have ever seen a picture of burnt out viper because the power steering cap came lose, you would jump on this easy and inexpensive fix to the problem. I purchased the HI-PO Engineering solution the moment I seen it. I met...
  23. R

    What type of oil do you use?

    I switched over to AMSOIL for the engine, trans and rearend. Very satisified. Best mileage on a trip with Mobil 1 was 22, after AMSOIL 25.5 mpg. Maybe this is a coincidence, but, I am sold on AMSOIL! Check out AMSOIL.com and look at the comparison statistics to Mobil 1 and other oils. Mobil...
  24. R

    Gen I Head Tourque specification???

    The service manual states that head bolts on a Gen I should be tourqued to 30 pounds then 1/4 turn. Can this be true? 30 pounds seems very low for head bolts. Can anyone either confirm or correct this specification? :usa:
  25. R

    Benefits of a 180 degree thermostat????

    Gen I service manual indicates that to change the thermostat which is on the rear of the engine, remove the wipers and cowl to gain access. Nothing mentioned about having to remove the intake manifold. :usa:

Latest posts

Members online

Total: 826 (members: 16, guests: 810)

Forum statistics

Threads
153,843
Posts
1,686,700
Members
18,455
Latest member
Mando9595

Share this page

Top