Search results

  1. P

    Side exhaust pipe covers with rear exhaust pipes ???

    I did a set up for a customer on a GTS ... I used side exhaust sills and welded on a flange at the side port with a aluminum cover to block off when he is not at the track. He can use side exhaust or cap it off and it will be rear exit for normal every day driving. I tested it on a dyno and the...
  2. P

    Viper drag racing

    The shafts are the weakest link for sure...I think on a BFG you have to control your launch a lot more than on a set of slicks. The harder the launch with no slippage is what causes the problems. I could only leave around 2100 RPM on the new BFG's with the same size shot you are wanting to...
  3. P

    I just got into the Hot Rod Magazine Pump Gas Drags!

    Congrats !!! We entered 4 cars, 2 supercharged and 2 nitrous cars, all were in the 10 second bracket. I guess they didn't want a race with nothing but Vipers...I think all three of the Vipers that made it in are faster than ours by quite a bit. We will see you down there to cheer you 3 on...best...
  4. P

    Prayers needed during a tough time

    Scott, I hope your son has a speedy recovery. Let me know if I can help you or your family with anything. Joe
  5. P

    Any pictures of Black GTS with Red Stipes?

    Vegasviper, My car is in my avatar, if you would like to see any others, I can e-mail them to you. Later, Joe
  6. P

    Thanks for the NOS answers. Just one problem, our dyno will only go up to..

    Sean, That is awesome !!! What a difference from the other pull. I am glad I could help out, god knows you have helped the rest of us a few times in the past. Later, Joe
  7. P

    If I paint my GTS Black, what color stripes look good?

    Gerald, I think the red looks killer !!! I can send you some other pics of my car if you would like a better look. Later, Joe
  8. P

    Gear Change $$$ (Complete)

    Black Venom, I believe the MP ring and pinion is around $450 and a set from Dana or Richmond is around $250. I charge $250 to set up the diff and charge the same as Chuck on the R & I ( 2 hours @ $95). You will need a crush sleeve, a set of shims, fluid, and additive to complete the job. I...
  9. P

    what will I need to be NHRA legal to 9.99 ?

    Zosicks, Unless they have changed the rules, you can not run a IRS in a 9.90 car, you have to change to a solid axle. I would go with the 6 point bar and a good set of harnesses, loops, and safety apparel and worry about 9 second passes when they come. NHRA tracks are where you will have to...
  10. P

    Picture of my painted Roe S/C

    Thanks everyone for the wonderful compliments ! I am very lucky to have great customers that let me experiment with their cars. I have a great support staff to back me...a gearhead service manager and a excellent paint shop and staff. I try to make everything a little unique, so everyone has...
  11. P

    Roe SC a/f ratio?

    Rstoker, Sorry, I didn't see the 5 # pulley reference. Sean was correct, mine was on a 8 # kit. Joe
  12. P

    Any ideas on how to intercool my Roe SC

    Hey guys, I was wondering what everyone was going to do. You would almost have to put the cooler under the blower to show any real gains. You need to cool the heated air after it has gone through the blower. If you would use a air to air before to cool the incoming air with a nitrous spray bar...
  13. P

    Why was my post edited? Here we go again!

    I am a little confused myself, a while back I posted about selling a SRT 10 and mentioned how I would like our dealership to be like some of the other well known viper dealers...and boom...the thread was pulled. There was nothing confrontational involved at all, if anything all I said were good...
  14. P

    Roe SC a/f ratio?

    Rstoker, I would go in and pull a little fuel out of the fuel RPM cells to bring it back up to 11.8 to 12.0. 12 to 1 is still a safe tune in my book. You should pick up some more horsepower and torque by smoothing out the a/f curve. Just go into each cell and add or subtract to smooth it out...
  15. P

    Battery draw ???? help needed.

    Tony, Sorry, I thought all GTS cars had that switch. Russ is correct, the hood pin switch will do the same thing. It is telling the alarm / entry module to stay in program mode. I will not set the VTSS and will leave the door lights on for what ever reason. Let us all know what you find...
  16. P

    Battery draw ???? help needed.

    Tony, Check the over-ride switch between the seats. Pull the center console and check the tumbler...if it doesn't see a closed circuit it will leave the inside door lock lights on and draw the battery down in a matter of days. It will never go into arm mode on the vtss either. I don't remember...
  17. P

    Question for all you viper tech guys about a Roe SC

    Swat, I would remove the studs where the blower sits on the intake first. You may be able to move the blower from side to side to get the silicone to loosen up. Don't forget about the bolts under the back of the blower. I would be afraid to pull on the blower snout too hard, but you may have...
  18. P

    Anyone looking for a deal on a new 2004 SRT/10???

    Jason, You have mail. Joe
  19. P

    Would anyone be interested in a better fix for side sills ?

    When I repair them, I open up the hole and install a 1/4 x 20 well plug and bolt. They pop rivet in ... but I have never had one spin after they were installed. I have had the sills off of my car numerous times and never had a problem. I have been doing this for several years and never lost a...
  20. P

    PCM Programming now available!!! L@@K!!

    Jason, I know from prior experience on a dyno that there is no way to hit peak power on one pull...are you going to allow reburns after delivery for fine tuning ? Are you going to include X amount of reflashes to maximize power or keep it to one flash ? Is there a way to send the program via...
  21. P

    Link to '96 Blown GTS Video of Dyno Runs

    Re: Link to \'96 Blown GTS Video of Dyno Runs OK , I must be blind...I have found every video except one of your car. Oh, by the way, that s 281 mustang and the s 351 mustang look very fast...are they your friend Kevin's products. The stock s 281 cars were not that impressive and I have only...
  22. P

    First dyno pulls !!!

    Shelby, I did the valve covers and the other pieces. I just scuffed the entire cover and blocked the lettering with 1500.Then I shot the entire cover in base and then blocked the lettering again. I had to hand sand the letters to remove all of the paint. Then just clear the entire cover. Snake...
  23. P

    First dyno pulls !!!

    Hedders with the factory shields are on the car. Joe
  24. P

    What splitter is this?

    It looks like a McCann Racing piece. That is his wing on the back. I don't know of to many carbon fiber splitters with adjustable supports. That would be my guess. Later, Joe
  25. P

    First dyno pulls !!!

    Bob, You have mail. Joe

Latest posts

Members online

Total: 712 (members: 16, guests: 696)

Forum statistics

Threads
153,844
Posts
1,686,709
Members
18,456
Latest member
viper2002

Share this page

Top