I met the guys who put that event on at AutoRama this year....I am going to try and plan on at least doing one of the events in Sept 2002....
I think that a few VCA members have entered in the past?
I did a search on Air-Bags and I could not find an answer to my question. Is it recomended that I disable the drivers AirBag for closed course events? I know that for the STATELINE OPEN ROAD CHALLANGE, they have made it mandatory....If so, how do I do it so that I can enable it again for street...
I just purchased my GTS a few weeks back and picked it up in Southern California....Dan Cragin was the tech who had done the mods on it and had been servicing it.....He recomended a Viper Tech for me in SLC..<FONT COLOR="LimeGreen">It was a great recomendation!</FONT c>....His name is <FONT...
I have read on some of the posts, that a rear wing will help with down force but will definetly slow you down. When I talked with Roe about the Front Fascia Cooling Duct they make, they claim not only does it cool your temps (it doess!) it will increase top speeds....
About "sleepers":
YOu mentioned "rust"....well let me tell you about a sleeper I had once...
68' Chevelle
Color: Misty Rust- satin finish with hints of grey primer
Interioir: Vintage vinyl with cusomt "venting" through out :>, ezcess interioir and panels removed.steel rims with caps.
Motor...
UtahViper:
Have you run in Speedweek at Bonneville? I amy take my GTS out there this August or Sept.
If I drop a roll-bar in, I hope they let me try for the 200MPH club.
We'll see....Mods so far
Borla exhaust system
High Flow Cats
Smooth Tubes
K&N
Aluminum flywheel
Roe Front fascia duct kit...
GT-40 as long as I could fit ( I am 6"3") Gt-40 meant that the cas max overall height off the ground was 40" I have actually sat in an orignal and I could not fit ( atleast to drive it correctly)....
If built right, the power to rate ratio will make it a track dominator.....We'll see...another...
Does anyone have any recomendations for spare rims and tires for club events and road course...there are a few suppliers in this site , I have seen anywhere from $2000 to $3500 a set...
Thanks
Wow....this thread is a runn'in>>>.I have seen the new SRT and on its own it is really a nice car, much nicer than the convertable Vette....But it definetly does not have the same "WoW!" affect when you see it as did the Gen 1-2 and GTS did. Also, it is hard to compare to the...
I have tried many detectors, living out here in the desert states and I would suggest that you save the money for the install and buy a Valentine1. Last week I did a test with my old detector ( Passport) and the Valentine consistantly went off a full 4 to 10 seconds before and it tells what...
I am 6"3" and a solid 230lbs(Belly paid for in full!) I had Dan Cragin put in a 1" seat lowering kit and I fit great!. Then again , my last toy was a Shelby 427 s/c Now that is a tight fit, my viper feels like a SUV in comparision....
One note: I have a GTS and it seems to have much more head...
Prices:
You are looking at anywhere from $2.40 to $3.10 per sqaure foot, depending on the style choice ( Free~flow, Diamond tile, Base Tile, etc) and qaunities.....
Dan Cragen:
Thanks for doing the work you did on my GTS....It runs great and stops on a dime.....
It really lost alot of power once I got back to the altitude we have here 4400 to 7000 feet above sea~level
Ramp edge:
If you go to our site www.racedeck.com and/or ww.snaplock.com and browse around and you will find various pictures of the "transitional ramp edging" in use.
Install:
Basically the only surface prep you need to do is sweep away any debris. Remember, with RaceDeck you never glue or...
The Ramp Edge is designed as a transitional piece. You do not need to have one along any wall. You can simply cut the RaceDeck to create any size wall-to-wall custom floor. In fact, you need to have about a 1/4" gap along all walls for expansion and contraction. You can hide the gap with wall...
Try looking on this page and see the b&w tiles, it has the edging http://www.racedeck.com/styles.htm
It snaps together using the same system
www.racedeck.com www.snaplock.com
MadMax:
I am glad you recieved your samples in a timely matter... As for"jacking up" on the tiles, you should have no problem. They only time you will see any damage is if you use an angle-iron style jack (3 post type) these tend to become quite sharp and can leave a indent or cut through...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.