Search results
-
F
Chryslers Awesome Quick Disconnect Fuel line.
Can you post the NAPA part number please? Thanx in advance.- Flyin Phil
- Post #3
- Forum: Performance Modifications
-
F
Looking for longer front wheel studs
Thanks, Janni, I'll do that! :)- Flyin Phil
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
Looking for longer front wheel studs
I am in search of front wheel studs that are 1/2" longer than stock. Does anyone know of a source and part number that will meet my needs? Thanks all. :usa:- Flyin Phil
- Thread
- Replies: 2
- Forum: RT/10 and GTS Discussions
-
F
Service needed...what about aftermarket mods?
I have a 4-year, 48,000 mile AddedCarePlus DC warranty package and would like to have some work performed under warranty. I don't want to remove any of my aftermarket performance parts prior to bringing the car to the dealership. Does anyone have experience with getting warranty work done...- Flyin Phil
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
F
Finally did a decent 1/4 mile in the SRT
Rick, good times! Sounds like you've been having the same problem getting under a 2.0 second 60' that I've been having at NED. The prep there is certainly not the best on a Wednesday or Friday night. Are you going to the Vettes/Vipers Shootout at NED on 11/18? If so, see you there!- Flyin Phil
- Post #6
- Forum: SRT10 and SRT10 Coupe Discussions
-
F
Interesting color scheme................................................
I must respect the fact that this owner had the guts to change the car to be an expression of his/her own taste. Too many Viper owners get overly concerned about making mods, to the point where just drilling a hole in their trunk might be looked upon as sacrilegious. If I didn't like the...- Flyin Phil
- Post #8
- Forum: RT/10 and GTS Discussions
-
F
I DID IT (HOODPAD PAINTED)
Re: I DID IT (HOODPAD PAINTED) FLX109 -- Are you going to either the Franconia cruise (9/13) or the NED Vipers/Vettes shootout (10/18)? If so, we can compare hood pads. My edges didn't come out very crisp so I'm looking for some ideas.- Flyin Phil
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
My first Viper is for sale again - good price??
Repainting isn't a bad thing, but repainting because the car was stored outside is terrible. You may want to avoid telling anyone it was stored outside. Maybe I'm just uniformed, but this is the first Viper I ever heard of not being garaged year-round. :confused:- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
what is up with this? typical of viper owners??
Glad I don't have my roof on very much. Wouldn't want anyone thinking that I think I'm a hot sh!t or something... :shocked:- Flyin Phil
- Post #4
- Forum: General Viper Discussion
-
F
Who has 10mm spark plug wires?
Taylor Vertex '409' wires measure 10.5 mm and are available from SummitRacing among other places. For my '96, I bought a set for a V8, then added 2 'replacement' wires; had to cut some wires to the correct length and installed coil ends onto each wire. Real nice once completed. I had already...- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
I just completed my last transaction with Jon B
If someone intentionally abused the vendor rating system, they should be tracked down and permanently banned from this site. We all look to this site for Viper-related knowledge THAT WE CAN TRUST. If someone has intentionally tried to abuse that trust by extreme biasing of a vendor's rating...- Flyin Phil
- Post #67
- Forum: RT/10 and GTS Discussions
-
F
Anyone in Houston have a BTR or Autoform roll bar in their RT /10?
With the BTR rollbar, you use your existing rear panel. It requires two holes to be cut into panel for the upper mounting bars. You can also buy an alternate rear panel from Autoform or PartRack if you don't want to cut your original panel.- Flyin Phil
- Post #5
- Forum: RT/10 and GTS Discussions
-
F
Anyone in Houston have a BTR or Autoform roll bar in their RT /10?
I have a BTR rollbar installed in my '96 RT/10. Without exception, everyone that has seen it has been impressed. One question that often is asked is 'Does the hardtop still fit OK?' because the top of the rollbar actually sits a little bit above the so-called 'sport bar'. I have had both the...- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
Vipers At Mopar Power Festival (8/10)
At New England Dragway, Epping, NH (www.newenglanddragway.com) "...The 15th Annual New England Dodge Dealers Mopar Power Festival on Sunday, August 10, with racing in the following trophy classes: Mopar Street (mufflers and street tires), Mopar Slick (no restrictions), Viper (no restrictions)...- Flyin Phil
- Thread
- Replies: 0
- Forum: VCA Viper Events and Gatherings
-
F
Drag Events Website
Nathan, you've got email about upcoming New England events.- Flyin Phil
- Post #3
- Forum: VCA Viper Events and Gatherings
-
F
Vipers At Mopar Power Festival (8/10)
At New England Dragway, Epping, NH (www.newenglanddragway.com) "...The 15th Annual New England Dodge Dealers Mopar Power Festival on Sunday, August 10, with racing in the following trophy classes: Mopar Street (mufflers and street tires), Mopar Slick (no restrictions), Viper (no restrictions)...- Flyin Phil
- Thread
- Replies: 0
- Forum: Viper Racing/Dyno Results/Time Slips
-
F
Will the rear wing rip off at this speed?
For what it's worth... If your car's got 10 miles on it and your saving it as a collector's item in a climate-controlled environoment, I can certainly see worrying about a few holes drilled in the body. I definitely wouldn't allow those holes to be drilled, that's for sure! Now, if you drive...- Flyin Phil
- Post #27
- Forum: RT/10 and GTS Discussions
-
F
Will the rear wing rip off at this speed?
Very sorry about the bad post above. I rechecked the template and, as GG stated, six it is... :o- Flyin Phil
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
Stripe Removal
I have not striped my hardtop yet. My local body shop procured the trunk stripes to be used on the Mopar wing. They were something in the range of $260. Mopar did not make a roof stripe. However, to get a hood stripe that would fit the roof was priced around $500 !!! I'm going to have mine...- Flyin Phil
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
Stripe Removal
I tried to have the stripes put onto the Mopar spoiler on my '96. The stripes themselves were way too expensive but I thought it was the correct solution. When they didn't work well due to the contours of the spoiler, they pulled off quite easily and in a single piece. Of course, this was...- Flyin Phil
- Post #6
- Forum: RT/10 and GTS Discussions
-
F
Drove 1700 miles--how many Vipers did I see?
Over the last two weeks, I drove 24 hours from NH to FL, and then drove 24 hours back from FL to NH. During this entire 48 hour period, I didn't see a single Viper other than the one I had on the trailer behind my truck...- Flyin Phil
- Post #3
- Forum: General Viper Discussion
-
F
No more videos guys :(
vipah, thanks. Weather is VERY hot and muggy, but I'm about to head back to Florida to retrieve my RT/10. Once I get back, I'm sure it'll rain for a month or so. As for the Old Man dropping dead, it was really one of those unbelieveable experiences. We (the resident of beautiful New Hampster)...- Flyin Phil
- Post #49
- Forum: Board and Site Questions/Suggestions
-
F
No more videos guys :(
vipah, sorry, I stand corrected and obviously outnumbered. :o- Flyin Phil
- Post #45
- Forum: Board and Site Questions/Suggestions
Members online
- Snake2K
- Badinternet
- fergazer
- ozzie
- Ben198597
- Loren jones
- Mopowr
- svtben
- gvatougios
- 04Mamba
- wagenman23
- wisetechscott
- Goggles Pizano
- Jim Myke
- beart9h1v8
- viperstoo
- Kermitmidthun
- ArcherTX
- Robin747474
- LifeIsGood
- mmacias2
- ItsAv10
- Viper1971
- 98-WC-GTS
- 28G
- blankline9
- gap
- Ralph
- Mark GTS
- Steve-Indy
- 7-LITRE
- johnk
- Gen5GTS
- Phantom
- bsandy
- Reguy
- GALA-96-GTS
- Joel McBride
- ahurdle
- kwik40
- JWVIPER
- kblake905
- AutoDude
- Spiller