Search results

  1. C

    Curious about you Sea Roe supercharger guys

    I don't know if Sean is still using Roll-pins but last year when I did it he was. Sean's kits fit's over the snout of the crank and has two pre-drilled holes in it. You'll need a 90 degree high speed drill. When you drill into the pre-drilled holes you will be in essence drilling into the crank...
  2. C

    Curious about you Sea Roe supercharger guys

    Hey ab, I've sheered the pins in the Roe kit twice and after talking with Sean he recommended using some solid dowel pins that McMaster Carr sells it was either 98380A514 or 98380A512 I can't remeber if they were the 1-1/2 or the 1-1/4 that I used (I Think it was 98380A514) but I do know they...
  3. C

    hello

    Welcome to the club, Just call your local dodge dealer and ask for parts department the part number is: 5245-194AB the metallic stock gaskets are much better than the cr@ppy belenger paper gaskets. They worked great for me, I've got the same headers (if yours are tri-Y). ~Matt~
  4. C

    Seen this Roe Viper on EBay??

    Wow, I never knew I lived 5 miles away from another Roe S/C car! Damn, I thought I was the only one here in Chi-town. Anyway, if anyone wants it inspected I could take a peek for you if the owner allows. ~Matt~
  5. C

    Emission Test #2

    Here's the thread from my first try Well, after 100 fun miles I decided to take my car back to the emissions facility tuesday. First off let me clarify that I was wrong in my previous post. The results of my first test were "Rejected" not "Failed" according to the DMV dude there's a big...
  6. C

    Ahhhhh, I failed Emissions....

    Ditto on tag!
  7. C

    Ahhhhh, I failed Emissions....

    This was my first test, and had I not reset the PCM the emissions guy said I would have been fine. He then said "just come back next week, you'll be OK". So take that for what it's worth, post 96' model cars only get ODBII scanned, no more exhaust wand. ~Matt~
  8. C

    Ahhhhh, I failed Emissions....

    Dammit, I was working on my car today repairing that shattered power steering bracket I had last week and after I got my belt back on and after visual inspection I started the car to make sure the belt was seated properly so I figured I'll leave the airbox off just in case I need to reach down...
  9. C

    Made my own Drive Shaft Saftey loops...not bad. PICS-finished product!

    Re: Made my own Drive Shaft Saftey loops...didn\'t come out too bad. PICS You'd be amazed at how strong home depot buckets are! I've got 4 holding up my trailer home. LOL Nice Job ab! ~Matt~
  10. C

    The Incredible Power of the Viper does it again...

    Well, I just had my first dealing with Doug Levin and man what a Guy. Seriously what a class act, you DLM guys are lucky to have someone like that as we are with Sean. Thank you Doug for taking the time to speak with me and for express shipping the bracket. Oh and I almost forgot Doug's forged...
  11. C

    The Incredible Power of the Viper does it again...

    Normally I would be furious about something like this. Last night I took a ride to hollywood video to rent a movie. Now the video store is 3 blocks away from my house, but of course it takes me 20 minutes to get there and back. There is no such thing as a 3 block drive in a viper, it doesn't...
  12. C

    .

    This thread reminds me of when I went to see "Blue man group". A drooling dead stare gaze while trying to figure out what the point is.
  13. C

    How much more RWHP from7PSI to 8 PSI Roe pulley

    Odds are, since HP is a calculation of TQ and RPM's he's making more power under the curve as I stated earlier. Peak TQ happens at around 3000-3500RPM. His TQ increase alone tells me that he has gained power in the low/mid range. There is alot to be said for tuning in this area. There is power...
  14. C

    My GTS is at 19,994 miles time to sell before it hits 20K...

    NOT!!! Holy Jeez, my side still hurts from that post! ROTFLMAO! Just felt like being a d!ck this morning... Doh! ~Matt~
  15. C

    How much more RWHP from7PSI to 8 PSI Roe pulley

    "Under the curve" means below the peak numbers. Hold the dyno graphs next to each other and disregard the peak numbers. Compare the entire rpm range, do you show greater gains in any of the rpm ranges. (i.e. 8lb pulley 450HP @3000rpm VS. 10lb pulley 500 @3000rmp). What you may see is that you...
  16. C

    How much more RWHP from7PSI to 8 PSI Roe pulley

    Vipercane, What about the numbers under the curve? ~Matt~
  17. C

    Anyone selling heavy duty set of drive shafts?

    You have a PM
  18. C

    Isnt This A ROE S/C??? Saw This On Ebay

    I don't know the history of this story or why your advising someone not to sell this unit, but the last time I checked people sold broken items on ebay all the time. If the seller lists it as damaged and says sold as-is. I'd buy it for the spare working parts. I bet he'd get decent money for it...
  19. C

    Next mod: headers vs VEC2 vs rockers?

    If you've got $4000 burning a hole in your pocket, spend a few more and get the roe blower that comes with the Vec2. All of that other crap you could pick up for pennies on the dollar in the classified's. Do some due diligence and you'll find that there are about a half-dozen people with...
  20. C

    Did anyone ever figure out the Idle Hang problem?

    Re: I fixed my idle hang Big Medicine, You may want to check your ground wires, especially the one in front on the driver side under the hood. I reseat mine as well as clean them with a wire brush every year, you'd be amazed at how fast they corrode. Also check the one on the front of the...
  21. C

    Do fast cars make us fat?

    No, but McDonald's, Burger King, and Taco Bell does...
  22. C

    How much more power with a 10 psi Roe kit?

    Depending on how radical you go on the heads, I would expect anywhere between 690HP/750TQ to 725HP/800TQ. You may want to wait for Sean's intercooler before you jump up to the 10lb pulley. I would say that you would probably net the the first figure if you started with the 8lb pulley. ~Matt~
  23. C

    More Pics of the intercooling project...

    Adam you slob, what's with all the oil dry. LOL :D
  24. C

    How about another JonB's the man post!!!

    How about another JonB\'s the man post!!! Once again in a time of need JonB went above and beyond the call of duty. Last weekend I blew out one of my MXX3's and we all know how hard it is to find those. My other rear has 95% tread left so to buy a whole set of something else was heartbreaking...
  25. C

    ab's revenge on the HID group buy! Read to see if anyone interested $280.00

    Re: ab\'s revenge on the HID group buy! Read to see if anyone interested $280.00 Let's do a group buy on diapers for all th SOB's that sh!t in my passanger seat! :D

Latest posts

Members online

Total: 745 (members: 11, guests: 734)

Forum statistics

Threads
153,844
Posts
1,686,710
Members
18,456
Latest member
viper2002

Share this page

Top