Search results

  1. D

    What weight of mobil 1 should I be using?

    I've used Royal Purple in all my cars ever since I tried it out one day and noticed a smoother idle. You can get it from JC Whitney for $5.49 a quart.
  2. D

    Power Steering pully fell off

    With a P/S pulley puller...
  3. D

    DC Performance, Our DYNO has arrived!!!

    Conrats on the new toy. Which one did you get?
  4. D

    A/C Low Pressure fill port... does yours leak?

    It is just a schrader valve. Just tighten or replace it.
  5. D

    Fixed my running hot problem - run the AC!

    Just remember, if you were low on refrigerant, then it leaked out somewhere. If you simply refill it without fixing the leak, then it will leak out again.
  6. D

    OT: Better Business Bureau

    I got the same sales pitch a while back. I declined as well.
  7. D

    Need opinions on intercooling.

    Who are you streak? What shop are you from?
  8. D

    what would 850 cc injectors equal to in lbs?

    Just remember... Those blitz injectors are side feed. They are the same as FD3S secondary injectors. Your stock fuel rails probably dont flow enough for them. 850cc/min is about 90lbs/hr.
  9. D

    Need Viper Tech in Vallejo Ca.

    Carleton, if you could convince the owner to stop by my shop, I'll check it out for you at no charge.
  10. D

    okay this is really weird!! Need some diagnosis from experts

    I'd check all battery connections first. Wire wheel all connections at the battery, starter, + terminal, and all grounds.
  11. D

    How do you do a 180 degree burnout

    Sounds like you've never worked at a valet parking co. before. Thats where I learned most of this stuff.
  12. D

    temperature guage

    Sending unit failure is common. Part is $50.
  13. D

    How can you leave your Viper parked without worrying all the time?

    Hey SF Final 286, What part of the city do you live in? I lived in Chinatown and used to park my car on the street. Moved to richmond district and I still park on the street most of the time. Lifes too short to worry about things that "can happen". Let the insurance companies worry about it...
  14. D

    Pimp my ride

    Have you ever seen a civic in WCC? I haven't... I did see that Ferrari Enzo they had there though.
  15. D

    is the NACA duct susposto suck air when you hit the gas?

    How do you susposto spell it like that every single time
  16. D

    Who read the Car/Driver acticle on pushrod engines?

    I'd love to see someone make a custom eccentric shaft and put together a 7 rotor motor.
  17. D

    A\F Ratio on Paxton car?

    Re: A\\F Ratio on Paxton car? 12.2 is fine, it just doesnt give you alot of room to compensate for bad gas, overheating, and other variables that can cause knock. You're running at a reasonably low boost level anyway, I'd leave it alone if it were my car. But then again, if it were my car, I'd...
  18. D

    Anyone know how many Pulses per Output shaft rotation?

    huh?
  19. D

    Anyone know how many Pulses per Output shaft rotation?

    There are 4
  20. D

    Who makes a digital numeric A/F gauge

    My guess is techedge
  21. D

    do i HAVE to get my tranny fuild change over to the clear stuff???

    You don't HAVE to unless your tranny makes rattling noises loud enough to bother you. If you're fine with it, leave the Dexron 3 in there.
  22. D

    Any one purchased tires from this place? $199 each

    Yup I've bought tires from them before too. No problems.
  23. D

    GTS dash panel removal

    Congratulations on the upgrade. The dash is easy to replace. All you need is a screwdriver and an hour or so. Have fun!
  24. D

    How much CFM does the stock 1998 vs the 1999's and above fans pull?

    Re: How much CFM does the stock 1998 vs the 1999\'s and above fans pull? Not sure about exact CFM numbers, but I do know that one of the benefits of the 99+ fan is the placement of the fan, and the diameter. The motor is also smaller but stronger.
  25. D

    Barb fitting on the intake Plenum....removal.

    It involves a drill, a hammer, and various size pipe taps... I dont see why you would want to do that though.

Latest posts

Members online

Total: 652 (members: 7, guests: 645)

Forum statistics

Threads
153,963
Posts
1,687,533
Members
18,591
Latest member
inquiryhub

Share this page

Top