Search results

  1. V

    What parts are needed to remove/replace intake manifold

    If your car is stock the fuel rails are built into the manifold. I would recomend you replace the injector o-rings, the o-ring for the fuel supply, and intake gaskets. If your careful the gaskets on the throttle bodys and iac wont need to be relaced. Hope this helps!
  2. V

    Any Regrets with the High Flow Cats

    I think the metal ones flow slightly better than the ceramic. I held my metal ones up to the sun and could see a ton of light straight through them. I asked what the difference was on the metal compared to ceramic and was told by Jon B. that you cant see daylight through the ceramic. He also...
  3. V

    fuel pump better/bigger than stock

    Not true, the RT/10 has the access panel in the truck. It is the GTS in which the service manual states you have to "CUT" into the fiberglass and create your own access panel. I have a RT/10 and had to replace my pump. I ran out of gas and after a fill up the pump was junk. The reason i ran...
  4. V

    T&D Rocker Installation Questions

    Because the baffle is paper thin. Its the adjusting nut that comes in contact with the baffle. Better to remove it or dimple it in with a hammer and punch.
  5. V

    Factory Short Shifter

    Ok i was unaware that the knobs were different in earlier years. From what i remember they all looked the same. I have a lathe that i used for the whole process. An aftermarket shifter is just that an aftermarket one. Some like aftermarket some dont. I prefer the factory look so i have the...
  6. V

    Factory Short Shifter

    To keep shipping costs to a mininum just use a padded envelope. They are strong, light, and you can ship first class. Shipping to me I bet would be $1-2.
  7. V

    Factory Short Shifter

    The boot holds itself up. It does not need anything as its in its relaxed position where it is.
  8. V

    Factory Short Shifter

    Id be all for some type of exchange program. The only problem with that is the quality of each persons shifter. You know wear and tear factor. I actually have another shifter i bought off ebay to do this test with. I was nt gonna cut my original one before i knew it would work fine.
  9. V

    Factory Short Shifter

    Hey Dave...When ever my buddies start talking about size...I just say its little. It ends the whole mine is bigger than yours. The ladies know the real truth and they never complain:D
  10. V

    Factory Short Shifter

    That is the whole point. It is not supposed to look different than a stock shifter. Its a modified stock shifter for the guys who want a short shifter, but retain the stock look/hardware. And YES that is a stock shift knob. I guess you dont own a viper, otherwise you would know its stock, but...
  11. V

    Factory Short Shifter

    The shorter shifter makes it to where you can rest your hand on the center console while shifting. It makes the car much more pleasent to drive, no matter what the driving situation is. I could give you a money back guarantee, but if you wernt happy then id have to weld the piece back on i cut...
  12. V

    Factory Short Shifter

    If your like me and like to mod your car, but keep the factory look this mod may be for you. I took my factory shifter and shortened it by 2". This is the same distance as the aftermarket ones but retains the stock look. All work is done on a lathe so the quality of the finished part is top...
  13. V

    Stripes....but a little bit different.

    Interesting how it says "CHRYSLER" on the back bumper instead of "DODGE". Is this a Gen I thing or another country thing?
  14. V

    1.8 Roller Rockers On A Gen II?

    Is anybody running 1.8's on there Gen II? I know the norm is 1.7 but T&D makes a 1.8 for the Gen II. I called them and they said with 1.8 youd have about .650 lift at the valve with the stock cam. That is sounding pretty good:D Im wondering why I dont hear anyone running these on the Gen II...
  15. V

    A little help please, 2000 RT/10....

    NO, NO, NO, you guys have it all wrong. You have to push the PA button (personal Address) on the stereo. This way when your in the parking lot at Hooters everybody can hear the stereo just fine. You tilt the hood and now the sound is directional.:lmao::lmao::lmao::2tu:
  16. V

    This must be a Scam

    He states the car is in vegas. Ask for the address and have a member in vegas go look at it. Im sure youd get the run around why so and so is unavailable to see the vehicle. Tell him you want the vin# to run a car fax. I bet he wont give you that either. LOL I Got beat to...
  17. V

    OK, who will admit to buying.................

    It was prolly one of his buddies bidding on it to start the bidding war:lmao::lmao::lmao::lmao::lmao::2tu:
  18. V

    hardtop hoist.... has anybody built one?

    I just stand on the passenger seat with one foot and lift it off. Im 5 9 175 and average strength. I think its pretty easy to do. I also have my socks on when i lift it off.
  19. V

    Cooling System Acting Up

    I have a similiar situation. I noticed after owning the car about 1 year that it was running a little hotter than normal. It would run past the 3 rd line of the three. I checked the recovory bottle and it was almost empty. I topped it off and it sucked about half the bottle in. I topped it...
  20. V

    Driving without hoodpad?

    Can you post a pic of what the hood looks like without the hood pad. Mine is kinda ratty looking so id like to see before i take it off. Anybody priced a new pad?
  21. V

    STRIKER HEADS

    Anyone have a set of the Striker street heads they want to sell for a Gen II? Please PM me if you do. Thanks
  22. V

    Someone lost a black 2000 RT/10 in PHX last night

    Nice to see that your neighbors would call the cops cause you potentially wrecked your car. Those are some good neighbors indeed.:mad:
  23. V

    rich guy w/ Viper steals g friend

    What I want to know is WHY you did nt get her number and take her out? I am surprised you let the opportunity pass you up like that. Could you imagine her telling her frineds how you guys met? LOL
  24. V

    Viper Plates

    Mine is "Z06 KLRR":D. Now i just need to mod the Gen II to make the car live up to the plate:drive:
  25. V

    VIPER VS. Z06?????

    So all the above mods would not give a 150 H.P. advantage? I know gears dont add h.p., but they do help get from point A to point B a little quicker. And according to Jon B. the gears make it feel like you added 50-75 h.p. I was thinking with those mods plus the gears it would be a close one, no?

Latest posts

Members online

Total: 608 (members: 3, guests: 605)

Forum statistics

Threads
153,963
Posts
1,687,532
Members
18,590
Latest member
AB3835

Share this page

Top