Search results
-
S
Plate for center air vent?
Does anyone sell a plate for the center air vent to mount a gauge or lcd in? Or have a 3d print file or a scan of the area I could make a file from? Have kind of a complex setup going on but the bottom line is I want to mount a 16x2 lcd in place of the center air vent. The lcd will display...- serafins
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
S
Oil Pan Mystery
Got an interesting one for the viper brain trust. I have this pan off my '99 ACR. By all external indications, it is the short pan for the 8.5qt oil system (2 rib, early internal bosses, fastener holes bump out the side of the pan lip). I have the correct dipstick and tube for a '99...- serafins
- Thread
- Replies: 24
- Forum: RT/10 and GTS Discussions
-
S
What really limits rev capability on these cars?
I've read every thread out there on this. So please don't tell me to search. My question is what limits the rev capability besides oiling on these cars? Specifically gen 2 but since I suspect the answer involves main bearings, and they are the same for all gens, it's sort of universal. Oiling...- serafins
- Thread
- Replies: 10
- Forum: General Viper Discussion
-
S
Tach Slow / Lagging
The tach in my '99 is very slow to sweep when revving. When driving aggressively to redline, it shows about 5k rpm at the time I hit fuel cut. Fuel cut is verified at prefix at a true 5950rpm. So the tach is lagging about 950 rpm. If revs are brought up slowly it will show the correct rpm...- serafins
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
S
Advice on Engine Build Gen 2
Going to be putting together an engine for my Gen 2 this winter. I have GTSR heads that were ran at Lemans. These are the big port heads with "stock" bowl and runners. Although if you look close you can see where Caldwell ported them and then bead blasted the runners and bowl to make it look...- serafins
- Thread
- Replies: 10
- Forum: General Viper Discussion
-
S
Gen 2 track thoughts
My thoughts after running my gen 2 acr at the track for the first time at Waterford Hills. Tires: The continental extreme contact tires that are becoming real popular for the 18" wheels **** when they get hot. They are a great street tire and hold up for maybe 2 laps at speed. Then they turn to...- serafins
- Thread
- Replies: 11
- Forum: General Viper Discussion
-
S
Front fascia alignment
Sorry for this thread as I know there are hundreds of them but all the old photos are gone. I have abhorrent gap between the front corner of the hood and the bumper. Excellent gap between the hood lip and the bumper. Good gaps all the rest of the way around. Anyone know what I would adjust to...- serafins
- Thread
- Replies: 8
- Forum: RT/10 and GTS Discussions
-
S
ACR Koni Shock Manual Supplement
Does anyone have the owners manual supplement they could post for the 99-2000.5 ACR that came with the Koni shocks? I need to adjust my ride height as the front of my car is sitting higher than the rear.- serafins
- Thread
- Replies: 16
- Forum: RT/10 and GTS Discussions
-
S
New gen ii ACR owner - shifter stiff?
hi everyone, Really excited to join the viper community with my purchase of this 99 GTS ACR. I’m currently trailering it from Florida to my home in Michigan. My question involves the shifter. It is STIFF. Very stiff. Also doesn’t seem to center itself when in neutral. Is this just how they...- serafins
- Thread
- Replies: 12
- Forum: New Owner Questions
