Search results

  1. P

    Best spark plugs for a mildly modified engine?

    These are the engine mods: 93 R/T 10. VEC2, 708 cam, 29 lbs. Gen 2 injectors, Smooth tubes, Jesel 1.7 shaft rockers, Edelbrock Headers, 3" muffler upgrade kit, catalytic delete pipes, Aluminum Flywheel, Aluminum radiator, 172 degree thermostat, Centerforce clutch kit, 3.55 ring and pinion...
  2. P

    708 cam and adustable timing chain installation

    Bill: Thanks a lot! I din't want to continue when I noticed the difference between parts. I'm also going 3 degrees advance. Will post new HP numbers after assembly. Right now I'm at 384 DIN which is aronund 416 SAE at the rear wheels. Regards
  3. P

    708 cam and adustable timing chain installation

    Maybe I'm misunderstood, the problem is not drilling the cam to the 3 bolt pattern , but the 2 extra slot marks found on the original cam sprocket that are missing on the Cloyes one. On the following link you can see that the original cam gear (still on the engine) has a half moon between 2 and...
  4. P

    708 cam and adustable timing chain installation

    I finally got the parts down here. The adjustable timing chain comes in a Mopar box, but is't a Cloyes part. The cam must be drilled and tapped for a 3 bolt configuration. But the strange thing is the original cam gear has a half moon and opposite to it, two slots to tell the ECU tdc position...
  5. P

    OEM Head Bolts to ARP Pro Series Cylinder Head Stud Kits

    Customer Service at Summit got back to me. I have to fill a return form and send it back to them. It was around $300, let's see how much it takes to get the credit back. Thanks for shedding some light.
  6. P

    OEM Head Bolts to ARP Pro Series Cylinder Head Stud Kits

    I bought a set from Summit for my 93 RT/10 but these are totally different from the original bolts. The bolts seem to be 9/16 and longer. The studs are 1/2 inch and shorter. Thet are listed as 247-4201 for 91-93 Dodge Viper. Has anyone gone through this? PICTURES AT...
  7. P

    Aeromotive A1000 fuel pump anyone?

    I just received a 427 all aluminum 18º SBC N/A 640HP, Locomotive F.I. made by Tom Nelson (check september´s Hot Rod magazine or his website). The guy makes 1000 - 1200 Turbo engines like pankakes. He recommended the A1000.
  8. P

    Wanted - hard top

    We designed the top without the "fake" scoop. Carbon fibre is cool enough by itself. But I prefer functionality over looks. The top is smoother, that means less wind noise and less aerodynamic drag. But after doing all this, adding a scoop to the top is plain easy. If you check my photo gallery...
  9. P

    Upgrade to 708 Lumpy Cam or aftermarket?

    Who has this info? Everyone talks about the 708 cam, but really, what´s it duration? How does it compare to Comp Cams 97-320-10? CompCams:duration @0.050 218/224, lift(1.6r).528/.536 LSA 114º 708: duration ? ? lift .541/.541 LSA ? The 708 has more lift than the CC, but...
  10. P

    Doing a 708 cam change, who has the parts?

    Not to worry, what spins opposite is either when you flush the toilet or after beer number 12. LOL
  11. P

    Doing a 708 cam change, who has the parts?

    After reading the busy "Upgrade to 708 Lumpy Cam or aftermarket?" post, in whiche noneone mentions aftermarket, and posting my "7K Mods = 384 RWHP, Need More, cam and head job next?" where the 384 are DIN HP and actually 416 SAE, I decided on doing the 708 cam swap, I need the following list of...
  12. P

    Wanted - hard top

    I have 5 point seatbelt harnesses, so I had no problem with the door seatbelts, the door is wide enough as to not interfere with the window guides. I´ll check this week to be 100%sure.
  13. P

    Wanted - hard top

    V10SpeedLuvr:THANKS for posting the pictures! This was done in Argentina, and we made 2 kits. The windows ARE power, and yes we use a remote control with door poppers. Only minor cutting was done to the top of the door with a template, to install the window wheatherstrip. The link below shows...
  14. P

    7K Mods = 384 RWHP, Need More, cam and head job next?

    Chad, Thanks!!! now these are DIN HP. SAE would be 416 @ 5000.
  15. P

    Upgrade to 708 Lumpy Cam or aftermarket?

    What's are the complete cam specs, only the lift and overlap have been listed, what's the duration at 0.050?
  16. P

    7K Mods = 384 RWHP, Need More, cam and head job next?

    You can see the baseline and the dynoed HP at the following adress, yet, maybe someone could be kind enough to post the files directly on this post. http://www.sportchips.com.ar/nuestrosclientes/aspirados/fichaviper/viper.htm I'm sure the curves will shed some light, also as to how the dyno...
  17. P

    7K Mods = 384 RWHP, Need More, cam and head job next?

    93 R/T 10. VEC2, 29 lbs. Gen 2 injectors, Smooth tubes, Jesel 1.7 shaft rockers, Edelbrock Headers, 3" muffler upgrade kit, catalytic convertor delete pipes, Aluminum Flywheel, Aluminum radiator, 172 degree thermostat, Centerforce clutch kit, 3.55 ring and pinion. After all this mods, the car is...
  18. P

    Vipermania windows.

    PM me with your mail. We've made a kit with real power windows and a carbon fiber top for the Gen 1. I'll send pictures. Or read the post "Wanted - hard top" Gary
  19. P

    $1100 for a set of engine gaskets?!

    Thanks, I'll call the guys above and see if I can get a more reasonable quote. Gary
  20. P

    Wanted - hard top

    V10SpeedLuvr I sent you the pictures, we´ve assembled it here in Argentina. Feel free to ask / comment. Gary
  21. P

    $1100 for a set of engine gaskets?!

    I called Potamkin Rivera Dodge in FL for a set of gaskets for my R/T 10, not only did they keep me waiting on the line for 20 minutes (I'm in Argentina), but they quoted $1100!! Is this correct? Funny thing is the seller asked if the 93 is a convertible! Where can I get good prices and better...
  22. P

    Aldan Shock Absorber Any Good?

    I didn't get any good results, they've lost the gas charge twice in less than a year, funny thing is they've sent me just one repair kit! I would nor recommend them.
  23. P

    Wanted - hard top

    I've assembled a kit with a carbon fiber roof and power windows which makes the car a pleasure to drive at sustained high speeds, NO wind noise, it made the R/T 10 a whole new driving experience of what I was used to. PM me with your mail and I'll send some pictures (I don't have a clue as to...
  24. P

    1993 R/T 10 rear taillights and mods Interesting post

    I'll try to take some pictures tomorrow, and start a new post. Everyone has shown interest on the windows and roof, but what about the tail lights??
  25. P

    1993 R/T 10 rear taillights and mods Interesting post

    I will do that tomorrow, will also post some pictures over at GenI/II

Latest posts

Members online

Total: 959 (members: 6, guests: 953)

Forum statistics

Threads
153,242
Posts
1,682,324
Members
17,740
Latest member
TheHunter

Share this page

Top