I use the Deltran Battery tender too and can recomend it. I also wanted a nice solution for quick connecting my battery tender. One of the viperclub members made a battery cover with quick access to the battery and as an extra a fixed Deltran connection. When I now enter the garage I can just...
Hi some post ago I talked about reinforcing the tubes. Well I am now 10.000miles further and everything ok so far. Believe me here in Belgium my windows travel a lot up and down due to our weather.
So if you can reinforce the tubing so it gets less stress and reinforce the plastic housing of...
@Corrado.SV, where are you located in europe? I live in Antwerp (Belgium). If you cannot source Viper parts I have a few good dealers who can help out. Autohaus Höllerich in Helmbrechts (Germany) is very good and professional. Helmut, the owner, is a big Viper enthousiast itself and has a lot of...
Roy, all european produced Vipers have this exhaust. In the back you have what they call the city exhaust. Above 3000rpm the valves open and is uses the sidepipes. It had to do with EU regulations in 2003. If you relove the back exhaust en put the valves in permanent open mode you hace a US...
Hi guys,
I spent the last few hours reading on the forum and searching via de dedicated function. I have a 2006 roadster and want to install a catch can. Problem is plumbing. The problem is that I saw a lot of picturen but all are different then my engine covers. According to my service and...
Hi Chris,
I live in Belgium and have an RT/10 and SRT-10. On ebay.de there are a few complete motors. You can also call Helmut Höllerich with my compliments at www.viperteam.de
regards, Roland
I have a different solution. I have an air pump in the trunk and a set to plug the tire. Nice and clean fix.
http://www.ebay.com/itm/TIRE-REPAIR-PLUG-KIT-HEAVY-DUTY-35PC-PUNCTURE-PATCH-TIRE-FIX-IT-KIT-/181185931933?pt=LH_DefaultDomain_0&hash=item2a2f85ea9d&vxp=mtr#ht_1460wt_1143
Never...
I Always used a DRB III and the inclinometers. I know some alligning equipment from Beissbarth has the EU spec Viper in the software. Doing this yourself without equipment is nearly impossible to get it wright in my opinion.
3rd the Michelin. I had the Original runflats still on the car from 2006. Lastmonth I changed to the michelin Super Sport. What a difference. The car now realy sticks to the road and handles much better.
Roland
Ok now everybody will shoot me but I did the install and was not satisfied with the result! I ended installing my crossover again. The sound is lumpier and that is not bad BUT my decel pops are almost gone and that is unacceptabe for me :nono:
Do I need to add something like headers and...
Hi guys,
Today I did the conversion from the GEN3 crossover exhaust to the GEN4 exhaust tips. Everything is installed but I forgot to take measurements. Can somebody with a gen 4 make a picture of the sidesill where the exhaust is and mark some the dimensions between sidesill and exhaust...
Guys,
Both problems are solved! I changed my MOPAR acid battery for an optima AGM battery. It now cranks perfect and a lot stronger.
The 2nd problem with the rattling noise under the dash was the RB3 nav radio. When you unlock the car or open the door it accesses the CDrom to verify it is...
Hi guys,
I have some strange issues with my 06 vert and hpe one of you can shed some light.
1) I have strange starting issues. Sometimes my cars starts normal but now more frequently when I push the start nothing happens (keeping button pressed) and all of a sudden after a few seconds the...
Hi guys,
I few weeks ago I stumbled accross the thread of Doug Shelby where I read about the new battery panel he made for the Viper. My viper is a daily driver but for winter storage or when doing upgrades I need access to the battery. In the past I removed the panel a few time and already...
Thanks for the info. Does anyone have the partnumbers of the latest doorpanels? When I look for 2010 models I get:
1 0XC871X9AC PANEL. Left. Door Trim Front, Front Door Trim. . [X9].
PANEL. Door Trim Front. Left. [X9]. Trim: *O0, -X9, . ST. Required: 001 $1055.00 0XC871X9AC
1...
Hi guys,
Looking for GEN4 exhaust tips left and right. Later on I will do a header back MOD but for the time being I need to go this route.
Can anyone help me out.
Roland
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.