I found a place in Wake Forest, NC that sells ethanol-free 93 octane gas. Thought I'd gas up there (that's where WF police fuel their vehicles) for the trip over to Asheville:
Holding Oil & Gas
534 South White St
Wake Forest, NC 27587
Anyone been to this service station in Statesville...
My clutch master cylinder will squeak if I haven't driven my Viper for a couple weeks. It is definately coming from the cylinder, not the linkage, as a dab of silicone grease on the m/c shaft right above the dust seal kills the squeak. After operating the clutch maybe 10 times, the squeak is...
I'm looking for wiper blade refills (just replacing the wiping edge, not the entire blade assembly) to fit the OEM blades on my 2001 Viper. Local stores carry the entire assembly, but they are not quite the same length as the OEM units.
OEM blades are still available (about $40 ea), but...
My 2001 RT has a squeak when pressing the clutch pedal. I checked the linkage, and the squeak is coming from the rod that goes to the clutch master cylinder. I applied a very thin application of silicone grease on the master cylinder shaft, and that has almost eliminated the squeak.
Is this...
Merry Christmas! If the weather is looking good on New Year's Day, Grill 57 (www.grill57.com) has a cruise-in that day. I missed the last one, but heard there were probably 500 cars there.
Give it some thought and let's see how the weather turns out. That cruise-in would be a nice way to...
Maurice's new book on the development of the Gen V Viper is available for pre-order. There is a $25 discount per book for an order of 10 or more to one address. Here's the link for the book:
http://www.drivesrt.com/viperbook/
Anyone interested?
Just saw that Advance Auto has Mobil1 for $4.99 per quart.
You have to order it online and pick up in the store. And no crazed shoppers to deal with at Advance Auto!
I'd like to have my ABS unit (2001 Viper) flushed out with a DRB III or similar tool. Anyone know of a competent mechanic in the Raleigh area that can do this? I've not called the dealers yet, but may have to. Thanks.
Saw this on the SRT site: http://www.srtshop.com/product.asp?dept_id=172&pf_id=10CYA
With Christmas coming up, it would be a great stocking stuffer for Viper owners.
Which top to use for VOI? It would be nice to drive the RT/10 to Charlotte with the top off and the soft top in the trunk, but is a hardtop needed for track events? Thank you.
Weather looks clear. Anyone else going? I'll be at the church at Six Forks and 540 at 8:20, and want to leave for Brier Creek at 8:30 for decent parking.
i adjusted the blue Koni shocks from my 2001 RT/10 (10,800 miles). All were at the softest setting. After adjusting each shock, the piston was slow to rise. Should the piston rise quickly or is this typical for the blue Konis? Thank you.
What products have you all used to clean the hood pad on your Viper?
Has anyone used any sort of "dressing" such as Adam's VRT or Lexol Vinylex or similar on the hood pad? Thank you.
Anyone interested in going? I'd like to leave Raleigh at 7:15 or so on that Friday. Stuart, remember to wear your heated suit. :)
From VIR's website:
Charity Laps to Benefit Ronald McDonald House Charities®Posted on February 7, 2012
Usher in the spring at VIRginia International...
Has anyone had any wheels repaired (some curb rash that needs material welded on and the wheel turned on a lathe) and refinished at a shop in or around Raleigh? If so, would you recommend the shop?
I've seen that California Chrome Wheel has a good rep and their prices seem reasonable. It...
I'm thinking about replacing the shifter in my 2001 RT/10, and I like the height of the OEM shifter. I guess that puts me in a minority. :)
For you Vipers folks that have installed the Dodge/Hurst shift lever: What is the height of your Hurst shift lever (measuring from the console to the...
Any recommendations for Viper Techs in the Raleigh, NC area?
Tom Sessions is the only guy I'm aware of but he's 2 hours from Raleigh.
Many thanks.
Regards,
Craig
2001 RT/10
Using the Dodge parts listing, I think the part number is 04708235, but the parts book shows only one per car. There are two.
The flap attaches to the front splash shields using 4 rivets.
Driver's side part:
Pass side part:
Is that the correct part number and the...
Does anyone know the diameter of the fill hole on the differential on a 2001? In other words, what size hose would fit into the differential fill hole?
My fluid transfer gun has a 5/8" OD hose, and I'm thinking this may be wider than the opening. Thank you.
Yes, Plum, I searched but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.