The PDF text is as follows: (opened fine for me)
INTRODUCTION
ORECA can propose to you from now the CHRYSLER-MOPAR Performance Parts
and the ORECA specific parts, developed through five years of success with the
Vipers factory cars, for your Chrysler Viper GTS or RT 10.
You will find in this brochure the proposed parts for :
- your engine and exhaust system
- your rear axle
- your brakes
- your suspensions
ENGINE
Description Unit price in €
Street performance cylinder head 4 250,40 / pair
A356-T6 aluminium alloy with high flow ports and a fully machined
combustion chamber
Direct replacement for production cylinder heads
Design for production valve train or Mopar roller rocker arm assembly
Reference : P 48 76 869
For Vipers RT 10 from ‘97 and GTS from ’96
Race rocker arm assembly 1 983,75 / pair
The Mopar Performance Parts’ Viper rocker arm assembly is based
on the part tested and proven victorious on the 24 Hours of Le Mans
and Daytona GTS-R. The race rocker assembly features :
- individual shaft mounted rockers with needle bearings on
shafts and rocker tips
- forged aluminium 1.7 ratio rockers
- rockers mount to one piece CNC steel billet bar for positive
alignement
- 12 points aircraft quality mounting hardware and rocker arm
adjusters
Reference : P 50 07 049
For Vipers RT 10 from ’97 and GTS from ’96
ENGINE
Description Unit price in €
Race calibrated engine controller
For Vipers equipped with Mopar Performance Parts air filters,
smooth bore inlet hoses, 1.7 ratio rocker arms and performance
exhaust systems
Re-calibrated fuel/spark curves for 50 BHP and 4 mdaN torque
Increase
Reference : P 50 07 313
For Vipers RT 10 from ’97 to ’99 and GTS from ’96 to ’99
Performance oil pans 1 380,00
Direct replacement for production oil pan
Re-designed sump and trap doors keep oil at pickup during
high acceleration / deceleration and lateral Gs
Scraper and windage tray engineered for improved oil control
Reference : P 50 07 008 for Vipers RT 10 from ’92 to ’96
P 50 07 009 for Vipers RT 10 from ’97 and GTS from ’96
Smooth bore inlet hoses 276,00 / pair
Increased air flow with less turbulence provides more
horsepower
5-ply polyester reinforced silicone shell eliminates collapse
due to high vacuum
Fluro-silicone liner for fuel / oil protection and very long
Durability
Reference : P 50 07 362
For all Vipers RT 10 and GTS models
ENGINE
Description Unit price in €
Air filter element 112,13 / pair
ACR production part
Requires two per car
Reference : P 48 76 095
For all Vipers RT 10 and GTS models
Street headers 920,00 / pair
Same as ‘97-’99 production
439 stainless steel construction
10 kg lighter than production cast iron manifolds
Includes : mounting hardware, high temperature heat shields,
gaskets and header-to-catalyst pipe (welding required)
Reference : P50 07 019
For Vipers RT 10 and GTS from ’92 to ’96
Performance exhaust system 1 926,25 / pair
Low restriction with a performance sound
304 stainless steel construction
75 mm diameter for a high volume flow
Exclusive laser etched Viper logo on polished stainless steel
exhaust tips with rolled rims
Bolt on replacement for production rear exit exhaust
Reference : P 50 07 274
For Vipers RT 10 from ’97 and GTS from ‘96
ENGINE
Description Unit price in €
Spark plug wire sets
Suppression type compatible with engine control unit
8.5 mm diameter high temperature material for added
durability
Individually numbered spark plug terminals and boots
Reference : P 48 76 435 for Vipers RT 10 and GTS from ’92 to ’96 114,71
P 50 07 159 for Vipers RT 10 from ’97 and GTS from ’96 100,05
REAR AXLE
Description Unit price in €
Crown wheel and pinion sets
3 ratios available : 3.55, 3.73 and 4.10 instead of the original
3.07
Gives you a 16, 21 or 34 % increase in wheel torque !!! but
reduces your maximum speed in the same ratio
Reference : P 50 07 021 for 3.55 ratio 623,60
P 50 07 022 for 3.73 ratio 623,60
P 50 07 043 for 4.10 ratio 623,60
These CWP are available for all Vipers RT 10 and GTS from ’96
equipped with the Dana Super 44 differential
Internal parts for rear axle / set 630,20
This set of parts includes all the necessary parts you need to
rebuild your rear axle :
- bearings
- seals
- preload washers and shims
- nuts
- dust cover
FRONT AND REAR SUSPENSIONS
Description Unit price in €
Mopar performance dampers
Steel bodies racing shocks offering the ability to tune the
chassis handling characteristics
Externally adjustable in rebound allowing the user to quickly
and easily adjust the damping from hard to soft according to
the required application
Use existing mounting hardware
Reference : front damper P 50 07 305 328,90
rear damper P 50 07 306 351,90
For all Vipers RT 10 and GTS from ‘96
Penske performance dampers
The Penske racing shocks company uses the same technology
and materials proven on the race track for the road
You can choose between double and triple adjustable dampers
2 way adjustable dampers give you 1 bump and 1 rebound adjustments
3 way adjustable dampers give you 1 low speed bump, 1 high speed
bump and 1 rebound adjustments
For Vipers GTS from ’96
References : front 2 way adjustable damper PS-VIP 81 F 1 128,15
rear 2 way adjustable damper PS-VIP 81 R 1 128,15
front 3 way adjustable damper PS-VIP 87 F 1 627,25
rear 3 way adjustable damper PS-VIP 87 R 1 627,25
BRAKES
Description Unit price in €
Front kit 3 335,00
Includes :
- 2 ventilated 332 mm diameter discs
- 2 Brembo 4 pots aluminium callipers machined from
high quality aluminium castings ; 4 differential pistons
for minimum pad taper ; no ‘’off brake’’ disc drag
- 2 aluminium hats
- 4 performance pads
- all the hardware to assemble the parts on your car
- 2 aeronautic brake lines
Reference : 121.7001A
For all Vipers RT 10 and GTS from ’92
Rear kit 748,65
Uses the original front brake callipers and discs
Needs that you machine your rear uprights to take off
the original cast brackets supporting the original callipers
Needs the mounting of an hydraulic handbrake
Needs the use of 6 mm thickness spacers between the
hub and the rim to give the necessary clearance to the
callipers (they increase the rear track by 12 mm)
Includes :
- 2 calliper aluminium brackets
- 2 spacers for calliper clearance
- the necessary aeronautic brake lines and fittings and
the hardware to assemble the parts on your car
Reference : Viper-FR-3001 A for GTS from ’96
Viper-FR-3001 B for RT 10 from ‘92
BRAKES
Description Unit price in €
Hydraulic hand brake kit 220,80
Needs to be mounted if you use the Oreca rear brake kit
Includes :
- the handbrake itself
- the aeronautic brake lines
- the complete hardware
