Gained 54 Wheel HP with ...

[Q8]

Gained 54 wheel HP with ROE's "Custom Cylinder heads with 78cc chambers for forced induction applications. Features include; 3B stainless steel valves (1.92 Int. / 1.58 Exh.), Crane Springs, Teflon seals, fully machined / polished ports and chambers. Specifically designed for forced induction with flows of 267 Int. / 220 Exh. At .600” lift"

i didnt expect to gain that much without the supercharger since those heads lower the compression now im just waiting for the weather to cool down so i can put the supercharger back on

 

[plumcrazy]

what else ya got done to it ? ? ?

hows it run?

 

[Q8]

Full catless exhaust,K&Ns and Jesels not bad for $2600 heads

 

[Casey]

Why do you have to wait for the weather to cool down.

Get it on, and get back to boosting!

 

[Q8]

since im not in Boston anymore and back to Kuwait the temp here is 100F at night and 120F+ during the day

 

[plumcrazy]

GOOD reason

 

[Q8]

GOOD reason

i have the NX wet kit too and im wondering what plugs are you using with it ? and if it is ok to use the stock plugs with a 100hp shot?

 

[plumcrazy]

autolite, ONE step colder #3923 plugs, and gapped at 33-35

im told always use a colder plug.

 

[Q8]

Thanks alot

 

[J DAWG]

autolite, ONE step colder #3923 plugs, and gapped at 33-35

im told always use a colder plug.

these are actually 2 steps colder, but will work just fine.



thanks for posting the numbers. It is always interesting to hear what certain mods do in different situations.


John

 

[plumcrazy]

ooops

 

[v10kingsnake]

funny, the techs at nitrous express told me i was fine running with the factory plugs. tom at btr i think says the same thing on his site

 

[RedEnuf93]

For 100HP shot I have run stock plugs, no problems so far.
Thats what Lee Dove instructed. At 150HP its time for colder plugs...

 

[Jack B]

The oem plugs work when you have the mixture hog rich, get a litle lean and you have glow plugs.