is it OK to leave Viper on Jackstands for a couple weeks?

GotAViper

Enthusiast
Joined
May 5, 2005
Posts
808
Reaction score
0
Location
Annapolis,MD
Well im selling my BBS LM and GTS wheels to get CCW 505A wheels. It is very possible that both my wheels will sell at the same time.

Can I leave the car on jackstands for a few weeks until the new wheels come in?
or what would you suggest

Thanks.
 

big-n-italian

Enthusiast
Joined
Jul 17, 2004
Posts
8,547
Reaction score
0
Location
Central Illinois
i left my car on jackstands all winter last year so i could clean the underside and do some work. no problems from what i could see.

car WAS A PITA to get up there though!
 

IL96RT10

Viper Owner
Joined
Apr 25, 2005
Posts
147
Reaction score
0
Location
Chicago IL
If you are storing a car is it better to leave it on Jack stands for months if you are not going to drive it
 
OP
OP
G

GotAViper

Enthusiast
Joined
May 5, 2005
Posts
808
Reaction score
0
Location
Annapolis,MD
well guess that answers that, thanks guys.


any hints as to where to put the jack stands so no tip over accidents happen.
 

-FROG-

Enthusiast
Joined
Mar 18, 2004
Posts
869
Reaction score
1
Location
Austin, Texas
The frame. Nice spots in the front around the engine and rear. Just takes a bit of manouvering to get them there if your car is really low.
 

ledfoot

Viper Owner
Joined
Jun 21, 2002
Posts
698
Reaction score
0
Location
bay area ca.
i had my car on jacks for 4 weeks waiting for the ccw's.....my only worry was a 5.5 earthquake......had to to drive the car on to homemade blocks before i could jack it up.....good luck
 

ViperJohn

Enthusiast
Joined
May 29, 2003
Posts
3,615
Reaction score
2
Location
Maryland
If you place the jack stands on the frame jack points the car will be solid as a rock.

Just keep the peanut butter and jelly away from the car! (Sorry, couldn't help it)
 

ViperJoe

Enthusiast
Joined
Jun 5, 2001
Posts
2,973
Reaction score
0
Location
Virginia
Better on stands without the weight of the tires and wheels though if it has to stay up on stands.
 

Bonkers

VCA Venom Member
Venom Member
Joined
Feb 26, 2002
Posts
5,338
Reaction score
80
Location
DelaWhere? USA
If you look on the frame rails there are holes drilled on all four corners of the ladder - I find those are excellent, and consistant, spots for putting jackstands.

Peice of advice, get yourself some nice soft peices of discarded carpet (any carpet/home improvement store will have bags full for free) and up them carpet side up on top of the jackstands - this will prevent scratching and allow for a broader face for the frame to sit on (as opposed to a sharp corner of the stands.)
 
Top