Just put on headers car is quieter!

[fuelman]

Macedo Motorsports installed Bellangers on my car this weekend. Exhaust note is awesome, throttle response increased, and best of all car is quieter with no drone at cruising speeds. The Corsa and the headers seem to be a good match, Macedo was worried the car was to quiet at idle until I got into the boost and ripped a hole the sound barrier, the car is seriously loud when you mash the go pedal. Throttle bodies next, then a 10 second pass to follow.

 

[Cudaman]

Hey Fuelman is that is why Larry Macedo is now wearing hearing aids!

Cudaman

 

[fuelman]

Yes I lent him mine, you know the ones I had to get after your car blew a hole in my ear drums.

 

[Cudaman]

Now you know why I have a hearing problem!

 

[SUN RA KAT]

Put a Roe Supercharger on it and it will be even quieter and at the same time quite a bit faster.

 

[fuelman]

Put a Roe Supercharger on it and it will be even quieter and at the same time quite a bit faster.

Sun Ra Kat,

I do have a Roe Super charger, now I just want an 8lb pulley.

 

[Cudaman]

8 lbs pulley .....New Forged pistons for you Creampuff.......

John you were probably the fastest Creampuff Roe S/C car with no headers or 70mm throttle bodies.

Get 70mm throttle bodies to go with your "no drone" headers and you will probably set new records!

Cudaman

 

[fuelman]

Cudaman, I won't be changing the pistons, I'll be adding an after cooler, then boosting up!

 

[Saleen-Explorer]

Cudaman, I won't be changing the pistons, I'll be adding an after cooler, then boosting up!

How much do you think or know you'll gain from an aftercooler on your setup? I'm not sure of the limits that the cast pistons can handle safely even with an after cooler, any idea on what the Cream Puff's can handle safely with a supercharger and cooler?

I'd still rather have forged pistons, but we're looking at the Cream Puff's, just something about them

 

[Cudaman]

There is currently testing going on as we speak.

Cudaman

 

[Cudaman]

Re: Just put on headers car is quieter!

Hey Fuelman quit taking my darn

and leaving me this silly faces:

Cudaman

 

[Larry Macedo]

Cudaman, I won't be changing the pistons, I'll be adding an after cooler, then boosting up!

How much do you think or know you'll gain from an aftercooler on your setup? I'm not sure of the limits that the cast pistons can handle safely even with an after cooler, any idea on what the Cream Puff's can handle safely with a supercharger and cooler?

I'd still rather have forged pistons, but we're looking at the Cream Puff's, just something about them

John decided he'd loan his cast piston "creampuff" for R&D of the 8 lb. system and an aftercooler

 

[Cudaman]

I loaned Larry Macedo some of my gray for his birthday ( today) too.... Larry just keep it under the hat.

Cudaman

 

[Saleen-Explorer]

John decided he'd loan his cast piston "creampuff" for R&D of the 8 lb. system and an aftercooler

Cool, let us know what happens, I really want to find out how much the cream puff engines can handle safely with a supercharger and after-cooler with a good tune.

 

[Larry Macedo]

I loaned Larry Macedo some of my gray for his birthday ( today) too.... Larry just keep it under the hat.

Cudaman

Ward, thanks for the loan since I haven't acquired any of my own yet! I'm all over the fuel system and the Lightning mods for J too btw. Once Bill's TT is finished I'll have more time for the toys.

 

[Cudaman]

Larry .... I hope you took off work early......Now with your OLD age you did not forget today is really your birthday......not last Sunday!

Please post some Dyno numbers on that Bad asp twin turbo Viper.

I have got plenty of gray for your own install.

I see 1Tony1 has let the "cat out of the bag"...Birthday Boy


Cudaman