New wheels and No "LOTIRE"

ulllose

Viper Owner
Joined
Aug 16, 2005
Posts
1,139
Reaction score
0
Location
Brunswick, Ohio
I would have thought i would have had to have the new tps calibrated with the bcm/ECM.

i noticed today while driving that it does not say "lotire"

Not sure, anyone else have this same situation?

Again i bought new wheels and new tp sensors.

Thanks
 

Nine Ball

Enthusiast
Joined
Aug 30, 2007
Posts
3,411
Reaction score
10
Location
Houston, TX
Usually takes a few miles. I bought four new TPS sensors and the LO TIRE warning came on after a few restarts and miles.
 

stopltracr

Viper Owner
Joined
Apr 9, 2008
Posts
34
Reaction score
0
Location
Wichita KS
Is that a common problem? Mine says it off and on. I checked all the tire pressures and they were all good.
 
OP
OP
U

ulllose

Viper Owner
Joined
Aug 16, 2005
Posts
1,139
Reaction score
0
Location
Brunswick, Ohio
As far as I know since i bought new sensors they would have to be programmed to the bcm/ecm. I was told that the system could hold up to 8 sensors in its memory. My point is that with the new sensors in i'm not getting a "lotire" on the dash, which i have driven the car 50+ miles. My next step would be to lower the pressure in one of the tires and see if it turns on then. If i don't have to get them programmed that would be great but i thought you had to..........:dunno:
 
Top