Rare Alpine CD cable on EBay for Gen 1stock Viper radios!

[GG]

Was cruising EBay this morning and found this. It is the same cable I used to connect my Alpine 6 disc M-Bus unit to the stock Chrysler/Alpne unit in my 94. Really a strange coincidence that this seller lives in Seattle just like me, anyway, if you are planning to add a cd to the stock unit jump all over this and use the buy it now.

web page

 

[carguy07]

Which way does this adapt? Stock head unit to after market disk changer or vise versa? Do you still need to run wires from front to back or just plug in? Thanks..KW

 

[GG]

Stock Gen 1 Chrysler/Alpine head unit to any Alpne M-bus 6 cd changer 601, 611, 620 etc. Plugs in-line at rear of head unit & yes you still have to run the din cable to the trunk. it took me about 2 hours to do it right following the wiring harness underneath the car with cable ties. There is a good write-up on this on one of the CA-VCA web sites...hope this helps...mine works & sounds great...much better than the FM radio...Gary

 

[Flyng Low]

Thanks, I just bought this one with "Buy it Now". I've been trying for two years to get my Alpine CD to work....