Supercharger fuel rail removal help

[FLX109]

Can anyone tell me how to remove my fuel rails from my roe supercharger? Do you just unbolt them and pop them off?
I am thinking about chrome plating them.
thanks
FLX109

 

[venomblue550]

we have done chrome on them many many times, and i think they just pop right off after unbolt....thanks

 

[Jack B]

Relieve the fuel pressure first.

 

[BlueGTS]

What is the best way to relieve the fuel pressure. I have done it on other cars by diconnecting the pump relay and starting the car. Is there a better way on the Viper?

 

[Simms]

The injectors are tight in the fuel rail. So you are gonna have to apply some foce, but be careful. I think you have to remove the air intake tubes with them because the fuel rails bolt to the air intake tubes from the bottom.

 

[unreelviper]

FLX109, I just had mine chrome plated. Once you have the rails off the car, remember to use a good chrome company that will take the time to keep the chrome out of the injector holes and the screw holes. You definitely don't want any chrome to get in your fuel rails, be careful. I used veenomblue550 to do my rails just last week and he did an exceptional job. He also did my air intake tubes,throttle bodies and the crossbar that connects the tubes together. His chrome plating preparation is second to none... Good Luck!!!