Search results

  1. K

    Misfire Unsupported in '96 PCM?

    I am running a '96 PCM in my '01 GTS in order to get it through DEQ. My '01 PCM has a modified program in it and it always has a check engine light on (thinks it has a bad program in it) so I can't go through DEQ with it. I have never had a problem before going through DEQ with the '96 PCM but...
  2. K

    Oregon Club meeting Oct 24th

    We will be having an Oregon club meeting on Oct 24th starting at noon. It will be held at Dick's Country Dodge in Hillsboro OR. Club officer nominations will be accepted at the meeting. There will be a lunch run afterwards to Helvatia Tavern. --- Ken
    • KenH
    • Thread
    • Replies: 0
    • Forum: Oregon
  3. K

    SCT Tuning - Misfire code

    The newer PCMs are subject to getting a misfire code when running Roe superchargers (and perhaps other forced induction/nitrous setups) due to reving the engine quicker than the PCM expects. There is a Misfire Leanout field with a value of 0-1 and set to 0.941 in my '01. The notes say to...
    • KenH
    • Thread
    • Replies: 1
    • Forum: Gen II
  4. K

    SCT Tuning - O2 heater malfunction

    With the outstanding pricing that Dan at Viper Specialty Specialty Performance gave on the SCT tuning package recently, I am sure there are a number of people tuning their own cars now. Let's get some threads going to share how to actually tune with this system since it comes with no manual...
    • KenH
    • Thread
    • Replies: 3
    • Forum: Gen II
  5. K

    Stuck valve spring retainer

    Finally got around to installing my new valve springs and roller rockers. On my 8th cylinder, I can't get the stupid retainer off :brick: I have bent the valve spring compressor tool and even managed to break the bolt off in the head and still can't break it free. I have tapped the retainer...
  6. K

    Adjusting pushrod adjuster on HS roller rockers

    I am in the middle of my holiday projects (TBs, roller rockers, valve springs) and I am a little confused at where the pushrod adjuster should be positioned on the Harland Sharp rockers. Hopefully someone can help set me straight. Per the instructions that came with the rockers: 1. Begin by...
  7. K

    Replacing springs and retainers

    Replacing valve springs and retainers I am curious if anyone bothers to replace the stock springs and retainers when upgrading to 1.7 RRs? You are suppose to be able to do this with the heads on the engine using compressed air. I'm just wondering if it there is much benefit in doing it with...
  8. K

    Installing the Autoform GTS Le Mans wing

    Does anyone have first hand experience mounting this wing? Wondering how involved it is to mount yourself rather than have a body shop install it. I found one thread that had some pics of the install, but the pics are long gone. --- Ken
  9. K

    Timberline Dodge VIPER Rally May 30th

    I posted this on the other thread, but figured it would be better to start a new one for visibility. Here's an opportunity for local Viper owners to help Timberline Dodge. Timberline has asked the local VCA and all local Viper owners for that matter to attend a Viper Rally on Saturday May...
    • KenH
    • Thread
    • Replies: 5
    • Forum: Oregon
  10. K

    Oregon Club Meeting February 21st

    OREGON VIPER CLUB MEETING Saturday, February 21st 12:00 - 1:00 Located at: Dick's Country Chrysler Jeep Dodge 767 SW Baseline Hillsboro, OR 97123 We've been invited to have our club meeting at Dick’s Country Chrysler Jeep Dodge. It's the Grand Opening of their new building, and they are...
    • KenH
    • Thread
    • Replies: 0
    • Forum: Oregon
  11. K

    2009/2010 Oregon Club officers

    The new Oregon Region Club Officers: President: Dick Crossley Vice President: Ken Hahn Secretary: Nichole Crossley Treasurer: Shelby Hahn Thanks to Dick Crossley for stepping up to the plate to be the new Oregon Region President. Thanks to Cody Reich for leading the...
    • KenH
    • Thread
    • Replies: 0
    • Forum: Oregon
  12. K

    SVS 70mm TB install help

    I picked up a pair of the polished 70mm TBs from SVS that were on sale. They look like quality pieces, but they came without any instructions or gaskets. They also require that all of the throttle springs, etc be moved over. Before I tear things apart and create a mess, does anyone have any...
  13. K

    Oregon Club meeting Feb16

    The Oregon region will be having our Q1 club meeting on Saturday, February 16th to put together the preliminary 2008 club schedule. It will be held at Timberline Dodge in Portland starting at 11am. Not a member, but thinking about it? Good time to stop in, meet some of the members and see...
    • KenH
    • Thread
    • Replies: 1
    • Forum: Oregon
  14. K

    Poly mounts and excess engine vibration

    I installed the Woodhouse poly engine mounts (black) and Dave's poly trans mount and billet crossmember. At idle there is a little more vibration to the car which I was expecting. At about 2000 rpm there is a significant engine vibration. Bad enough that it feels like I'm running on 9...
  15. K

    Anyone try the Snake-Oyl halfshafts?

    They are about $100 cheaper than the Unitrak version, but I haven't heard of anyone running them. Half Shafts :: Drivetrain components :: Drivetrain, Brake & Suspension :: Snake-Oyl Products :: Dodge Viper Products, Parts, Accessories
  16. K

    Any IAT tuning updates?

    Anyone have a chance to tune on the hot side yet or to see what the effect of water/methanol injection is on how to tune the IAT settings?
    • KenH
    • Thread
    • Replies: 0
    • Forum: Gen II
  17. K

    Autoform rear splitter pics

    I'm looking for pictures of the autoform 4-blade rear diffuser from angles other than the one that is on their website. Interested in how far out this unit extends when viewed from the side or top and if anyone who has seen one of these units has an opinion on how they look in general. Looking...
  18. K

    Need troubleshooting help

    My Viper has developed an intermittent problem. Sometimes when giving it some throttle either from a stop or on the open road, it starts bucking like it is getting a complete power cut which is coming and going about once a second. Backing out of the throttle causes it to run OK. It may be...
  19. K

    Water/Methanol injection check valves

    I am curious if anyone has added check valves to the Roe water/methanol lines at the injectors to try to improve tip in detonation performance by preventing water from being pulled from the lines during vacuum conditions. Seems to make sense logically, but also seems like they would partially...
  20. K

    Torco Accelerator octane booster

    I am wondering if anyone here has long term experience with the Torco Accelerator octane booster or other MMT based octane booster, preferably in a supercharged application. Seems to be a lot of positive comments when I do searches on the Ford forums, etc. and independent octane analysis...
  21. K

    Wiring VEC2 LED to shift light

    Anyone wire a shift light up to the RPM LED on the VEC2 box? If so, were you able to drive the shift light directly off that LED line without any problems and how did you get the wire outside the VEC2 enclosure?
  22. K

    Anyone running the 325/25-20" PS2?

    Anyone running the 325/25-20\" PS2? Anyone currently running the Pilot Sport PS2 in the Porche GT size of 325/25-20" on the back of their GenII? If so, how do you like them?
  23. K

    Pilot Sport PS2 335/30-20 availability

    I know the Pirelli's are in short supply, but is the PS2 335/30-20 availability good?
  24. K

    Auto Meter Digital Pro Shift System and D-PIC

    I need something useful to fill my 3rd gauge spot. I have a WideBand and Boost gauge. Curious if anyone has tried this shift light in a 2 1/16" gauge package. Seems to provide quite a bit of functionality. It says it is compatible with most V10s, but there seems to be some general...
  25. K

    Easiest way to disable interior lighting

    Just curious if anyone knows an easy way to disable the interior lighting so that doors and the hatch can be left open for extended periods of time without killing the battery. Is there a convenient fuse?

Latest posts

Members online

Total: 681 (members: 3, guests: 678)

Forum statistics

Threads
153,199
Posts
1,681,913
Members
17,696
Latest member
Viper123456

Share this page

Top