-
-
MoparMap replied to the thread Belanger exhaust system. Help..That seems excessive to me, but I've only put headers on a gen 3, not a 4. I don't recall having to take much if any of the top/front... -
MoparMap replied to the thread Is This A Door Sag/Hang Issue?.Hard to say, but at that kind of age it's probably a little bit of both. I know the seals on my 04 have split in several places, even...
-
MoparMap replied to the thread Gen2 Hydraulic Clutch Line.I know you can buy adapters to convert them to plain AN line. I run a T56 in my 67 Dart and use a Viper slave cylinder and I bought...
-
MoparMap replied to the thread How much of a financial “burden” has your GTS been?.It'll hopefully get there, but it's going to take time. You can't really compare a Lambo to a Viper as far as parts as they are two...
-
MoparMap replied to the thread How much of a financial “burden” has your GTS been?.For what it's worth, the Viper parts availability is hopefully coming around and getting better. As the cars get older they start...
-
MoparMap replied to the thread Low fuel pressure on start.I believe there is a check valve built into the pump assembly (where the regulator is on a gen 3 at least).
-
MoparMap replied to the thread Mystery misfire.If I do end up replacing them down the road I'll probably try NGK next, though I'm not sure if I remember them offering both packs or...
-
MoparMap replied to the thread Low fuel pressure on start.My gen 3 has very similar issues, though sometimes even first thing in the morning it will crank for a while. Sometimes it will catch...
-
MoparMap replied to the thread Mystery misfire.Delphis where what I had bought as well. I was thinking they were going to be a different Delphi though, so I was a bit disappointed...
-
MoparMap replied to the thread Mystery misfire.So went to put in the new coils last night and naturally one doesn’t fit as it has a different keying on the connector, so kind of back...
-
-
MoparMap replied to the thread Creaking dashboard.I went after my gen 3 in a similar fashion to what you are talking about. I've noticed some higher end cars will do a lining on the...
-
MoparMap replied to the thread Gen 3 Traction Control.Interesting. I was wondering how it would limit power if it wasn't tied into the PCM, but I see the injector piggyback setup in the...
-
MoparMap replied to the thread Mystery misfire.I was thinking the same thing, but I'm kind of running out of ideas at this point. Swapping injectors didn't seem to make any...
-
MoparMap replied to the thread Mystery misfire.Yeah, I had two different ones and they gave inconsistent results between them. Both are just inline neon tube type testers or whatever...
-
MoparMap replied to the thread Mystery misfire.Wires were replaced with ones from Qualitywires.com, looks like maybe 10 years ago (at least based on an old forum post). I pulled the...
-
-
Loading…
-
Loading…
