Recent content by Pry
-
P
Alarm set light/does not start
Ok, it was only a fuse.- Pry
- Post #13
- Forum: RT/10 and GTS Discussions
-
P
Alarm set light/does not start
I have this same problem on my Gen1. When I try to start the car it runs about 2 seconds and then it shuts off and the "alarm set" flashes. The remote doesn't seem to do anything anymore even though I just changed the batteries. Can someone pm me the cure? Thanks- Pry
- Post #12
- Forum: RT/10 and GTS Discussions
-
P
Top Gear episode featuring original RT/10
It was called Top Gear - Super Cars. It's presented by Clarkson and Tiff Needell and was released on VHS in 1994. Top Gear - Super Cars [VHS]- Pry
- Post #8
- Forum: RT/10 and GTS Discussions
-
P
Correct tire pressure for 19" on gen1
I had to replace the mystery switch with another one. Couldn't work out how all the wirings are supposed to work on the original switch. So the mystery of the original switch still remains. Another option for the right side of the plate could be a finnish green party "Vihreät - De Gröna"...- Pry
- Post #7
- Forum: Tire , Wheel, Brake and Suspension
-
P
Correct tire pressure for 19" on gen1
The European Chrysler Viper's had side markers and a rear fog light as standard. My car is an US model so I had to install them by myself. I think my side markers are from euro gen2 and the rear fog light isn't a Dodge part. I think it's meant to be used on a trailer or something. The trunk is...- Pry
- Post #4
- Forum: Tire , Wheel, Brake and Suspension
-
P
Correct tire pressure for 19" on gen1
Just bought a set of 19" CCW SP16a wheels with 355/25r19 and 285/30r19 Pirelli PZero Rosso tires for my gen1. What is the correct pressure for these tires? The manual says 35 psi for the original 17" tires. Here's the pics:- Pry
- Thread
- Replies: 7
- Forum: Tire , Wheel, Brake and Suspension
-
P
94 rt won't start
Thank you. The problem was with the clutch safety switch.- Pry
- Post #5
- Forum: RT/10 and GTS Discussions
-
P
94 rt won't start
I'm on a side of a road and my car won't start. When I turn the key nothing happens (just the fan turns off). The starter motor won't even try to turn. It's just like when I don't fully depress the clutch but it is fully depressed. What could be the problem?- Pry
- Thread
- Replies: 8
- Forum: RT/10 and GTS Discussions
-
P
Common Coolant leak problem. Help!
Is this the new better cap? Found it on my Gen 1. Maybe the previous owner upgraded it? I have a leaking facia tank so I guess that's the main reason for my coolant loss Edit: Actually it's the older type cap. I'll have to consider of changing it.- Pry
- Post #17
- Forum: RT/10 and GTS Discussions
-
P
Emerald green paint
Does anyone know what paint manufacturer to use for an emerald green Viper? I tried PPG's MQG paint but the tone was all wrong. Maybe some paint manufacturer has the tone more correct?- Pry
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
P
PS2 tire pressure recommendation for Gen 2's
How about Gen 1's? Is it 35 psi like the manual says? Why is there such a big difference between Gen 1 and Gen 2 pressures?- Pry
- Post #5
- Forum: RT/10 and GTS Discussions
-
P
Rear license plate bracket
Thanks, they are definitely an option but I would have to modify them a bit. European plates are wider and lower and the screws are at the edges. So I would have to cut the top of the holder and make a wider part on it to attach the screws. Pics featuring Partsrack's front license plate holder...- Pry
- Post #6
- Forum: RT/10 and GTS Discussions
-
P
Rear license plate bracket
Yes, I thought it would be a good idea to make it an own thread as the title was a bit off the subject.- Pry
- Post #3
- Forum: RT/10 and GTS Discussions
