Search results

  1. J

    Anyone got a origanl 1996 GTS exhaust?

    I have the full system for a 97, except for the heat shields. with about 2000 miles on these parts. E-mail me at: [email protected] Jerry
  2. J

    better, not shorter shifter?

    Kip Partridge in Denver can modify a stock shifter to have a stronger spring in the left gate. This helps to avoid the errant 3rd to 2nd shift, when you want 3rd to 4th. His phone is: 303-697-5821. Jerry
  3. J

    Corsa or Borla??

    That is definitely the older Borla cat back system. I have the same system, except I cut out the inner pipe. I also have the stock cats that have been opened to 3 inches, with B&B headers. The whole side sill part is coated with JetHot 2000 and does keep the sills relatively cool. I may be...
  4. J

    yes, another side sill repair question

    I used Jet Hot coating on the Borla exhaust where it goes through the side-sill. This has worked very well, even on the stock cats, which were opened to 3 inches. I have not had a heat problem for 15,000 miles. Jerry
  5. J

    Paxton belt alignment??

    The obvious answer to me is that the Paxton pulley is out of alignment with the rest of the pulleys. The belt is jumping to where it wants to run due to the position of the pulley. You need to adjust the blower or the pulley on the blower to align with the other pulleys. Jerry
  6. J

    is woodhouse really going to charge me $45 to ship motor mounts?

    I used to design engine mounts for GM many years ago. We tested all the other aftermarket brands for tensile failure, life cycle durability, and dynamic rubber compound characteristics. None of the competitor mount would pass our tests for these specifications. The others were of poor quality...
  7. J

    Better pics of the Roe triple pass radiator

    What is the plating? I notice a little bit of bloom around the welds; Is this just from the weld flux? Jerry
  8. J

    Three exhaust choices...

    I have B&B headers, stock cats opened to 3 in. pipe, and Borla Catbacks. This has a great sound and is not very loud. Several have told me it is the best they have heard. Jerry
  9. J

    steering gear crossmember recall necessary ?

    Here's how I made the fix before Dodge came out with the weld fix. Jerry
  10. J

    Looking for tow hooks

    Can we get Jerry Dobson's e-mail address?
  11. J

    Drivers Mat Won't Stay Put, What To Do?

  12. J

    Drivers Mat Won't Stay Put, What To Do?

    Here's what I did and it works very well. Put 2 grommets in the back of the mat. Tie them to the seat post on each side with a removable zip tie.
  13. J

    A Cold Hearted way to save Detroit car companies

    If Chrysler would step up to the plate by filing Chapter 11, then the other two car companies would also have to do the same. This would be their one chance to break the union contracts, move the assembly operations to the southern states and start making cars with the same wages that the...
  14. J

    How long have you owned your Viper???

    I am the original owner of a 97 GTS. Jerry
  15. J

    Best Battery for Viper??

    I have a red Optima in my 97 that I got from the factory here in Denver back in 1998. I keep it on a Deltran Battery Tender when not driving the car. It is still working just fine. Jerry
  16. J

    Anyone paint their GenIII 10 spoke wheels silver?

    If you like that color, I would do the powder coat instead of paint. I have this on a set of Audi wheels and the brake dust blows off easily with a power washer. Jerry
  17. J

    Best option for a floor jack?

    I have a Northern Tool (northerntool.com) set of 12 ton jackstands, that will put the car up 26 inches. You can almost sit up while under the car. I think they were about $110 for the set of 4. Jerry
  18. J

    5 point harness questions

    In my opinion, the 5-point system is the best, with the through the seat crotch belt. I have a writeup if interested. This system will hold you much better than a 6 point and will prevent sliding under the belt in an impact. Jerry
  19. J

    clutch replacement

    I got a reply on the Audi site that suggested that the clutches from: buyclutch.com are likely made in China. Can anyone verify this? Jerry
  20. J

    clutch replacement

    buyclutch.com is an E-bay company. Jerry
  21. J

    clutch replacement

    Has anyone bought a clutch from buyclutch.com? Were you satisfied with the product? Was it an OE Luk clutch? Are these guys a legitimate company? Jerry
  22. J

    Video Camera Mounts

    GTSDean makes one that goes on the package shelf. I have one in my car and it works great. Jerry
  23. J

    Optima Batteries can kiss my.......

    I have had an Optima 75-35 for 10 years now and it is still working just fine. Jerry
  24. J

    So where are all the original people from this site?

    I'm still here since 1997 and still have my car.
  25. J

    Excuse me, is your car on fire?

    These are the first stainless headers that B&B made, which were a copy of the Belengers. They are stainless. Here they are before applying the coating. Jerry

Latest posts

Staff online

Members online

Total: 1,089 (members: 14, guests: 1,075)

Forum statistics

Threads
153,839
Posts
1,686,664
Members
18,448
Latest member
JpKL

Share this page

Top