Search results
-
How late into the season do you all drive???
We had around thirty Vipers at our December meeting last night.- Fast Viper Dan
- Post #9
- Forum: RT/10 and GTS Discussions
-
Interior panel removal for Dean's Camera Mount
Re: Interior panel removal for Dean\'s Camera Mount It's a B*%*&, keep working it side to side. I remember having a tough time with the passenger side. It will flex some. It will come out, stick with it. When you get real frustrated take a break then go back at it. You'll get it. You will...- Fast Viper Dan
- Post #6
- Forum: RT/10 and GTS Discussions
-
Service engine light came on after dead battery
I have had my check engine light come on several times over the last four years. The check engine light was just on two weeks ago. There are several sensors that can trip this light. I have learned that as long as I have oil presser and the water temp is ok I keep driving the car and after one...- Fast Viper Dan
- Post #3
- Forum: RT/10 and GTS Discussions
-
I just beat Bobby Archer....
Good move Doc. Now you have a car that you can grow into. All the safty gear installed. Just drive it! Enjoy! Dan- Fast Viper Dan
- Post #15
- Forum: General Viper Discussion
-
25 HOURS of THUNDERHILL
The sales group representing the Radical will be up this week end. Some other track cars and or spec cars will be represented as well. Vipers Too. Dan- Fast Viper Dan
- Post #10
- Forum: RT/10 and GTS Discussions
-
25 HOURS of THUNDERHILL
Jonathan, Are you coming up to TH. this week end 11/22-11/23 with your Radical? There will be a few of them there. Dan- Fast Viper Dan
- Post #6
- Forum: RT/10 and GTS Discussions
-
Center consol crack, need help!
Mine has two cracks, Both are running out from the slot that the e-brake comes thru. One from the mid or center, the other from the rear or towards the back of the car. I leaned on the console just behind the e-brake. Dan- Fast Viper Dan
- Post #19
- Forum: RT/10 and GTS Discussions
-
Should I buy a track car?
Frank, My GTS is a "99" non ACR. Just to clear, I am comparing my time in the Viper with street tires to my time in the Panoz with Hoosier's on our tracks that are 2:00 min. +/- lap times. I was tiring to find some history from the Viper Days web site but it was not taking me back to 2001...- Fast Viper Dan
- Post #20
- Forum: General Viper Discussion
-
Should I buy a track car?
Don't bite me here guy's. I went thru the same thing and wound up buying a Panoz GTS race car. Why? well I run a bought 10 seconds faster (Average) than my near stock Viper and it's cheep to fix. Also it is vary safe. Roll cage etc. I love my GTS Viper and try to track it at least once a year...- Fast Viper Dan
- Post #10
- Forum: General Viper Discussion
-
Center consol crack, need help!
(Is your car under warranty? DC has warrantied many cracked center consoles because of the weak design (including mine). I think the last ones they put in the 02's had some sort of better support system.) I do have the Maxcare or Maxicare? extended warrentee. I am past the 3 year 36k. I'll...- Fast Viper Dan
- Post #8
- Forum: RT/10 and GTS Discussions
-
Center consol crack, need help!
I leaned on the center consol to many times and it cracked. I removed it from the car and tried ABS glue, PVC glue and A-B mix epoxy. None of these types of glue will bond to this material. I have been testing off to the side so when I find the right type of adhesive I will have a clean surface...- Fast Viper Dan
- Thread
- Replies: 19
- Forum: RT/10 and GTS Discussions
-
VOI 8! Sept 9 - 13, 2004
Good news for the Dallas P.D., Remember the front plate thing? Dan- Fast Viper Dan
- Post #61
- Forum: RT/10 and GTS Discussions
-
Why do you like stripes vs no stripes on your Viper?
Stripes require a 400hp. minimum. Dan, "99" GTS, Silver and Blue- Fast Viper Dan
- Post #74
- Forum: RT/10 and GTS Discussions
-
Brake Pad Replacement Instructions?
Just lift the car, remove the wheel and look at how the pads are held in place. It is vary simple. The needle nose pliers work just fine. (rears only) Fronts, just push the pistons in. Good Luck, Dan- Fast Viper Dan
- Post #6
- Forum: RT/10 and GTS Discussions
-
Problems with Woodhouse frame recall, Details inside.......
If I ever have a need to replace my Viper, my first call will be to WoodHouse, Bill P. or Bob if Bill is busy. I can believe something went wrong, but I can't believe Woodhouse holds all the blame. I do hope you will find resolution to your problem. Dan- Fast Viper Dan
- Post #85
- Forum: RT/10 and GTS Discussions
-
track alignment
Gavin, Are you interested in going to Button Willow Oct. 9,10. With a bunch of VCA members. Dan Go with Mikes numbers, I know it takes more than numbers but he is fast!- Fast Viper Dan
- Post #11
- Forum: RT/10 and GTS Discussions
-
Chance at the KY speedway!
If KY is an oval, Don't do it. Wait for a Viper Days event at a road corse. Dan- Fast Viper Dan
- Post #2
- Forum: RT/10 and GTS Discussions
-
Measurements for Stripes on GTS
Check the different color combo's and years. Some strips are close together and some are a little farther apart. Blue/white, Steal grey/silver, Red/silver. Close together silver/Blue, White/Blue GT2,Yellow/Black. Farther apart. Dan- Fast Viper Dan
- Post #2
- Forum: RT/10 and GTS Discussions
-
Door Alignment Procedures - Can anyone detail?
Dixter, I know what you mean, but I think there is some movement in the door itself. What I mean is the hinges may not move but the door will need to be realigned from time to time. Dan- Fast Viper Dan
- Post #4
- Forum: RT/10 and GTS Discussions
-
Door Alignment Procedures - Can anyone detail?
It's a snap! Remove the small side cover (?) just in front of the door, inside the "scalp of the hood". This will expose the door hinges. You need help with this part. Lessen the bolts that hold the hinge to the body and re tighten a little bit. Leave one, top or bottom a little looser than the...- Fast Viper Dan
- Post #3
- Forum: RT/10 and GTS Discussions
-
Who changes their own oil?
I use an ice pick and punch a hole in the bottom of the filter to drain in before unscrewing it and removing from the engine. That helps from making a big mess. It would help to pick up one of the low jacks from Harbor freight ($169-$179) this will allow you to lift the car without driving up on...- Fast Viper Dan
- Post #7
- Forum: RT/10 and GTS Discussions
-
Driver Window not working
Hold on there ! I had this problem and it turned out to be the wire harness that passes thru from the body into the door. After a day or so the speaker in the door stopped working as well. Try holding the switch and open the door at the same time. It still may not give you any movement if it's...- Fast Viper Dan
- Post #5
- Forum: RT/10 and GTS Discussions
-
New Personal Record
Do clean your rotors before installing the Green pads. Use sand paper and brake clean. This will give you smooth operation. The green pads will stick to any other resin left from the last pads used. What will happen is you will feel a bounce in the peddle. Dan- Fast Viper Dan
- Post #5
- Forum: General Viper Discussion
-
mumford first at laguna seca world challenge race
Yea, He's just Lucky! Ha-Ha! He is so lucky that the seasoned pro's just move off line and let him by! Let's not forget our teacher Skip Thomas, He started this VRL that provided the base for a lot of us week end drivers as well as a few "Lucky" drivers. Congrats to Paul and Mike. You guys...- Fast Viper Dan
- Post #31
- Forum: RT/10 and GTS Discussions
-
What needs done before Viper days?
Remove one of your front wheels and take a good look at your pads. Chances are if they have been there that long they are 1/2 or less. The grove in the center of the pad is around a 3/8 inch deep on new pads. The first half of the pads work a lot better than the second half due to the additional...- Fast Viper Dan
- Post #2
- Forum: RT/10 and GTS Discussions
