Search results

  1. H

    Another one bites the dust.

    An upside down RT/10 and no one gets hurt - Wow!
  2. H

    Stainless Brake Lines For Gen 2

    Leslie is the best! :2tu:
  3. H

    Barrett Jackson -Viper

    02 Graphite RT10 for sale 8K miles $65,000 :D
  4. H

    Power Steering Pulley (here we go again)

    Oh man, thanks Tony that makes a lot of sence, you must have been hot at that one. I've got a Roe pulley and bracket but I'm going to check for that problem.
  5. H

    Power Steering Pulley (here we go again)

    Thanks for all the advise everybody, I'm going to try leaving the pump on the car to replace the pulley and bracket. If I run into any problem I'll pull the pump and do it on the bench. It's funny how whenever you ask for input on an either /or question the feedback usually breaks about 50 /...
  6. H

    Power Steering Pulley (here we go again)

    I know this topic has been beat to death but I'm just getting ready to do the pulley & bracket swap. I've read through the threads on this topic and it seems most leave the pump on the car to do this swap. It sounds like everybody fights getting the old pulley off, usually in pieces with pullers...
  7. H

    '97 Performance Upgrades about $2K

    How much would one budget for a rear gear swap? I'm assuming you're figuring a 3:55?
  8. H

    Ft Lauderdale Viper - Need a favor

    Stay in contact on it, I got my current Viper after a "pending" deal fell apart. Apparently the guy didn't check with mama before hand.
  9. H

    Exhaust Gen 2

    I bought it all from JonB, he won't steer you wrong.
  10. H

    Exhaust Gen 2

  11. H

    Exhaust Gen 2

    The stock cat is welded on the front side and clamped on the back side so you willneed to cut it off. I cut mine off just on the "J" pipe side of the weld bead.
  12. H

    The good thing about Vipers in the winter!

    It snowed lightly here all day so I came home to 1 1/2" of snow to snowblow off of the drive. During the first trip down the drive I wrapped a rope from a sled the kids left out around the snowblower auger, 15 minutes with the knife and I got it out. I restarted the snow blower, got half way...
  13. H

    Hard Top

    I've talked to a couple guys with Gen 1's asking me if it would fit. Sounds like someone need to make a conversion kit.
  14. H

    Hard Top

    RT/10 Hard Top OEM Gen II - ViperClub Classifieds Anybody interested before I fleebay this Gen II hardtop, make an offer?
  15. H

    Should I stick with a Stock Thermostat?

    If you think you're running too hot you should buy a hotter T-stat. Like Tom said open is open, if you can keep the T stat closed longer the coolent will stray in radiator cooling off just a little longer and you'll introduce cooler coolent to the engine when the T-stat opens.
  16. H

    The good thing about Vipers in the winter!

    Here's my winter projects: EBS Red pads and Random Techs and 3" Corsa exhaust. After this is a new PS pulley and bracket and probably some new plugs and AB wires.
  17. H

    Random Tech Cat falling apart

    At first this string scared me, I just installed my RT's between Christmas and New Years and I thought I may have made a mistake until I saw the rest of the story. Now I'm pretty happy! :2tu: Feels like found money!
  18. H

    As always.....

    OK, I think I made it sound worse that it really is. While installing new cats and exhaust I clamped the cats and Corsa resonator up to each other and the "J" pipe, took it to my trusty muffler shop to weld, brought it back to install and everything fit back on the Viper perfecrtly. I started...
  19. H

    Pay it FORWARD!

    OK, I know it's a Viper web site but I hyave some old big block Mopar stuff to share: *A chome 426 Hemi breather cap *180 degree thermostat for a Mopar big block *NAPA Mileage Plus coil # IC12SB from a 440 cid *a 1969 and earlier battery tie down drop me a note if you can use any of this...
  20. H

    Pay it FORWARD!

    I've got some old Mopar stuff from some '69 big blocks even a couple Hemi pieces I'd like to pay it forward with, I'm just not prepared with a list right now, I'll get back with a list.
  21. H

    Pay it FORWARD!

    Wow! I'd like a 4" if still avalable!
  22. H

    As always.....

    Chuck took all the time I needed to help me through my stupidity, thanks for everything Chuck. Me and the rest of the Viper community will continue to do whatever is nesessary to support you.
  23. H

    JonB made me do it.....

    I talked to Jon today and he was counting his money from last year, sorry Jon, I couldn't resist. Just remember, I'm in Michigan..... Jon, not to be picking at bones but if you've got a black and white or silver and black, whatever would look best on a Graphite and Black RT10 I sure would...
  24. H

    Gen 2 Edelbrock headers

    Has anybody put these on a creampuff?
  25. H

    Getting Viper Home

    What Jon said. Just get it home, you've got all winter to clean her up.

Latest posts

Members online

Total: 715 (members: 10, guests: 705)

Forum statistics

Threads
153,843
Posts
1,686,699
Members
18,455
Latest member
Mando9595

Share this page

Top