Search results

  1. P

    latest blown srt #s !!!

    I am wrapping up a '04 with a set of my heads, a custom ground cam, and a novi 2000 and I finally got to make a few baseline pulls Saturday. I made a very mild timing curve on pump gas (93 octane) on 11 pounds of boost and it laid down 841 and 812. I will try to get back to it this week and turn...
  2. P

    Pics of hood and roof vent (smooth)

    Hey guys, I am glad to see the good response, I wasn't sure if I made the correct decision by smoothing everything out. I have some pics of the original car that we tried this on and Paul is almost finished with it. It is the same process except I added the Autoform center vents...The paint on...
  3. P

    Pics of hood and roof vent (smooth)

    Hey guys, We tried something new on a customer's car and I thought everyone may want to see. We took the hood and completely smoothed and filled all the gaps. It changes the entire look of the hood. We added a Autoform roof vent and moulded it in to the roof instead of just using the two sided...
  4. P

    Supercharged SRT with VEC 2, check out the dyno results...

    Tom, Thanks for the kind words. I am glad you gave me the chance to fine tune the car...I think it turned out fine. I think there is more there, we just have go about it in a safe way. The water deal is the quickest and the least expensive. I think we can get at least 30 more on water. I know...
  5. P

    I got blown yesterday!!!

    Here is a shot of a N/A short box with nos nozzle bungs. The one on Randy's car is the long version...it picks up air from the front facia along with the naca duct. I thought this turned out very cool.
  6. P

    I got blown yesterday!!!

    Hey Randy, Thank you for the kind words. I hope everything is what you expected, I thought the car ran great for a '01 and 5 pounds. I was planning on putting the same catch can and breather system on as your wife's car, but I have a new plan... I know everyone is worried about the oil back in...
  7. P

    New Gen 1 Roe numbers, thanks PBJ!!

    Hey Marty, Thank you for the kind words. I hope all is well and your frostbite is doing OK. Like you said, there was a little left on the table, but there are other ways to make it up. I think come springtime your car will be flying with just a little extra TLC... ;) Keep in touch and thanks...
  8. P

    Took her to the track.....results......

    Hey, Next time we will pill her up and run a low 10 with no problems...great driving by the way ! :2tu: Thanks and see ya soon, Joe
  9. P

    Performance by Joe ,,big thanks ( Dyno results )

    Hey James, Killer pass the other night... 10.66 in not to shabby for the small pills and pump gas. If we could have put the pills in that made the 600/820 the car would have gone 30s or 40s. ;) Thank you very much for the props and hopefully everything is cool with the car. Call me if you...
  10. P

    Latest Roe numbers !!!

    Pumpgas, All pulls were made from 7:oo pm and 2:00 am Thursday evening with the temps in the high 80s and humidity in the 30-40 percent range. The blower was packed with ice between pulls and fans on the entire time. The external blower housing temps were at 50 degrees and coolant was at 190...
  11. P

    Latest Roe numbers !!!

    Hey guys, This is a stock short block...stock displacement, pistons, and cam. I have a set of my shops ported heads which flowed high 280s @ 550. They were ported specifically for a blower with a stock lift cam. It has light weight valves and valvetrain (titanium) for better rpm response. I...
  12. P

    Latest Roe numbers !!!

    With all the twin turbo cars popping up, I thought I would just let the Roe guys know that there are some still being installed and making some good power. I finished the tune on a '97 last night for a car going to the Hot Rod 5 day 5 race event. It laid down 668 and 686 on 93 octane only...no...
  13. P

    Dyno results - I'm rich b!tch!!!

    Re: Dyno results - I\'m rich b!tch!!! Anaconda, I just tuned a car the other day with very similar numbers and mods and after the vec2 I ended up with 471 and 505...I thought that was a nice gain for a simple bolt on. There is a lot to be had with the vec 2 and a mild tune. See ya, Joe
  14. P

    ROE S/C with nos ?

    Hey Brad, Your torque numbers are low for some reason...On most of my set ups with similar baseline numbers I am around 700-750 HP and 950-1050 TQ with less than a 50 shot. I tune all of my Roe/NOS programs on at least 108 octane. Hope that helps, Joe
  15. P

    Can 900whp be had with Roe S/C

    I have to agree with Tony...no would be my guess. I am doing a 539 right now with a Roe and I don't think 900 is possible without spraying the car. The highest numbers so far for me is right at 800 rwhp and over 1100 rwtq, but I had to spray to get that. It is stock cubic inches (488), I don't...
  16. P

    My wifes Christmas present

    Randy, I have a new set of black wires on the way to finish off the package. They should be here by the end of the week. We can't have that splash of red throwing everything off. I looks to good for that to happen. See you soon. Thanks again, Joe
  17. P

    Someone Buy My Car!!!

    I was told that Shawn was buying your car...who knows. I do know price was a issue for him. It was between your car and a procharged Z-06, I am not sure what is going on... He sold his viper the other day so I am sure he is serious about purchasing one. He can't go a day without something fast...
  18. P

    Looking for a damaged front fascia

    Dave, I have my old one at the shop. The only damage is on the bottom. Stop by and take a look. I need to talk to you anyway about the auction donations and repairs. see ya, Joe
  19. P

    NEED HELP IN ST. LOUIS, CAN ANYONE CHECK OUT A CAR FOR ME

    Tom, You have mail. Joe
  20. P

    Pump Gas Drags

    Shawn, They have to pick you and your car to race in that event. I believe David Boggs and Tom Welch went last year. All you have to do is fill out the entry form and send pics of your car and they will let know. When are you stopping by with the new shaft ? Later, Joe
  21. P

    Help with Carfax/Dealer Search - 2001 blue RT in MO/IL

    Craig, Where is the car at ? If it is in town, I will swing by and take a look at it for you. Let me know, Joe
  22. P

    I still hate OBDII - evap, heated o2 and other frustrations

    Joe, I am assuming you have tried all of the normal repairs...drilling additional holes in the O2 sensors, moving the O2 bung into a single tube instead of the collector, longer tip O2 sensors ( I believe they are off of a 3.3 caravan). I have fought this problem before also, but usually one...
  23. P

    Any new info. on Roe S/C for Gen III

    Well Sean, I hope this kit does as well as the gen 1 and 2 kits...I am still stunned that Kevin's car went 9.78 on a totally stock car with a full exhaust system and the only mod done to the car is a set of T&D rockers...in my eyes that says something for your "street car blower design"...
  24. P

    V10 NATIONALS ALL A HOAX!!!!

    Ward, Before you start to slam me, I did not post this !!! I admit I was mad at the time and I acted like a ass, I also did go and apologize to David for my actions. I am used to NHRA rules and I should have won that race if it was, but this is Davids race and I have to follow his rules. I...
  25. P

    V-10 Nationals, Bradenton Classes

    I am under the impression that the only class that you have to own the car in is the street tire shoot out. So far, that is the way it has been. I am trying to support the event and bring cars to race. I can drive this car for this customers points if that is the case, he is in forth place...

Latest posts

Staff online

Members online

Total: 696 (members: 7, guests: 689)

Forum statistics

Threads
153,843
Posts
1,686,698
Members
18,455
Latest member
Mando9595

Share this page

Top