Search results

  1. P

    Question on fuel pressure issue

    Yves, My guess is your mechanic is correct. There is a check valve built into the module that keeps the fuel at the rail for your next start.I believe the regulator controls this if I am not mistaken...I could be wrong. If the fuel bleeds back into the tank the pump has to reprime the line to...
  2. P

    First dyno pulls !!!

    J Dawg, It is the 7/8 pound kit. I pulls a steady 8 psi across the power band. Mike, Post the pics... that would be great ! Thanks One other thing, the numbers on the dyno are corrected on a 1.01 sae scale if anyone was curious. Thanks for the nice words and yes, the car does drive great...
  3. P

    First dyno pulls !!!

    I just got off the dyno with my first Sean Roe Supercharger. After a couple of hours of tuning by air / fuel only, it laid down a best of 618 hp and 633 tq. This was on a flat 11.9 - 12.3 air / fuel reading from 2500 - 6000 rpm. This is on pump gas with a very mild timing curve... I didn't think...
  4. P

    GT2 Wing - vipercarparts

    Neil, I sent you a e-mail. Later, Joe
  5. P

    ROE Super Charger system

    Sean, No, I just got the 70 mm T-bodies from the customer on Saturday. I should have it running on Monday. I sent Dave a couple of pictures after everything was painted...the car looks great. The kit is very nice and well put together...I hope it runs as good as it looks. Thanks for the killer...
  6. P

    ROE Super Charger system

    Hey Sean, I just installed one of your 8 pound kits the other day and I installed your optional injectors and they were (lime green tops)...I thought those were 42 lbs. Are they 50's ? I have used Steeda injectors before and their 42's are (lime green top) also...there are top feeds also...
  7. P

    how to disconnect the alarm system's control of the fuel pump?

    Re: how to disconnect the alarm system\'s control of the fuel pump? Ron, I had a 95 that was stuck in vehicle theft once and the RKE was inop...the car was in a flood and sat for 3 years to make matters worse. The only way I could get the VTSS to let fuel turn on was by grounding the disarm...
  8. P

    Roe Blower Install Labor Costs

    1Tony1, Do you burn your own cards on your installs or use Sean's cards ? I am in the process of setting up a account with Sean at my dealership and I was curious how the program was ? I charge $95 a hour and that starts to add up when you are on a dyno... I am getting better at LS1 edit and I...
  9. P

    how to disconnect the alarm system's control of the fuel pump?

    Re: how to disconnect the alarm system\'s control of the fuel pump? BruceW, I believe you can ground the disarm wire at the EEM and the RKE module and that will override the VTSS. I would have to look up the correct color wires on Monday to be sure. I don't know if we should publicize the...
  10. P

    150 to 200 shot ???

    JackB, I used a 38 and 22 jet combination and that put my air fuel at 11.4. It pulled 576 and 678 at the rear wheels with that combo. Hope that helps. Joe
  11. P

    Recall Installed Incorrectly - Remedy?

    Chuck, I was told by our fine friends at DC hotline this was a good fix...they told me not to weld in the holes. They said it would weaken the rail by removing the rivets. They said either leave the gusset or weld a plate over the rivet holes. I didn't just come up with the idea off the top of...
  12. P

    Recall Installed Incorrectly - Remedy?

    Hey Guys, I have been cutting the gusset in the middle of the cross member (removing about a inch of the gusset) and butting a new set of gussets up to it and installing them the correct way. Then I cut out the area for the oil filter and weld all the way around all 4 gussets (if you leave a...
  13. P

    What do you think of this '99 ACR?

    Re: What do you think of this \'99 ACR? I just had this car at work the other day...3 weeks maybe, They had just put a battery in the car and it wouldn't idle afterwards. I reset the memory and reset the RKE. The car looked pretty clean, but I didn't look it over completely. If you are...
  14. P

    150 to 200 shot ???

    Zosicks, I have TNT stepped hedders,TNT exhaust without cats, comp cam, and some headwork with a set of T&D's. Joe
  15. P

    150 to 200 shot ???

    Zosicks, I pulled 576 HP and 678 TQ on a 125 nitrous jet and a 150 fuel jet with a 11.4 air/fuel reading. I set my jets to air fuel instead of what the kit called for. I figure I lost a little power, but I liked my air fuel readings. Later, Joe
  16. P

    What are the drag slick choices/prices for 18" Vipers?

    Re: What are the drag slick choices/prices for 18\" Vipers? sorry I forgot...I paid $ 261 each for the BFG's. Later, Joe
  17. P

    What are the drag slick choices/prices for 18" Vipers?

    Re: What are the drag slick choices/prices for 18\" Vipers? Hey, I tried the BFG's yesterday, I hit consistent mid 1.60's on a 2000 RPM launch...I tried a 3800 RPM shot and put the car sideways. My car pulled 678 foot pounds of torque at the rear wheels at 2500 RPM...not to bad for a street...
  18. P

    Lost to a Mustang........I'm so ashamed

    Re: Lost to a Mustang........I\'m so ashamed Hey MattL, I believe nitrous pete's car is here in St. Louis, if I am not mistaken the motor crapped out on him. I believe he has had a lot of problems with the car since the purchase...I don't know any specifics, only rumors. There are a few '03...
  19. P

    150 to 200 shot ???

    Hey guys, I just made some passes yesterday on a 150 and a 200. I made 3 passes on a 150, 11.04, 11.06, and 11.06. On the 200 I went 10.78. All of the runs were on drag radials. My MPH was weird because I had to shift to fifth at about 1000 foot. I hit the limiter in fourth on the one pass and...
  20. P

    driving impressions new SPEC carbon fiber clutch/al flywheel

    Did you follow the 400 mile break in procedure ... I installed the same set up in a '01 SS today and it felt very good. I did notice a little chatter on a slow easy launch. I told the customer to try to be easy on it for a while to seat the disc in and his response was...Yea Right !!! I have...
  21. P

    I Did It: Stripes On My GTS

    Sean, I thought I was the only nut-case that liked red stripes. You realize that you can't cruise around in the city... we will look like the bobsy twins. Anyway, it looks nice. Later, Joe
  22. P

    (2) 2004 SRT-10's @ Dodge Dealership here in STL

    Re: (2) 2004 SRT-10\'s @ Dodge Dealership here in STL Hey guys, Ours was ordered in by our dealership.... delivery date is near the end of the month. I am not sure of the specifics, but they are available. The thing that bothers me is, there are no green sheet purchases on vipers... what a...
  23. P

    HVAC One Way Check Valve Issue?

    Matt, The check valve is inside the car behind the A/C head... it should be covered. There is a revised part from a Ram/Dakota that we have less problems with. There is a TSB on this problem , but I don't know the part number off the top of my head. It is a different style valve, but it works...
  24. P

    ROE BLOWER WITH CHROME TUBES

    Mike, I just tried to call you at home...no answer or no machine. Could you please call me or shoot me a e-mail. I would like to ask you a couple of questions. Thanks, Joe
  25. P

    took advice on PSI for my BFGs

    V10MOJO aka Henry Rollins You have come a long way since Bowling Green. Congrats, that is a killer 60 foot time. Your ET seems to be falling every time I see you post, I wish I could say the same. Later, Joe

Latest posts

Members online

Total: 718 (members: 16, guests: 702)

Forum statistics

Threads
153,844
Posts
1,686,709
Members
18,456
Latest member
viper2002

Share this page

Top