Search results

  1. E

    97 GTS on E-Bay

    This car has been around! From Carfax: ++++++++++++++++ 12/01/1997 12 Delaware Motor Vehicle Dept. Wilmington, DE Title #00363373 Title or registration issued First owner reported 12/01/1997 Delaware Motor Vehicle Dept. Wilmington, DE Registered as private vehicle...
  2. E

    MOMO steering wheel vs airbag

    InVision said: "I would think most people wouldn't want to drive around the street with a harness though..." I do. ALL the time. Always. Yes it is a PITA, but the day that POS SUV makes a left turn in front of me, and I T-bone them, I'll be glad I'm harnessed in...
  3. E

    97 GTS on E-Bay

    BigCarrot? Who are you to talk??? You don't even own any stripes!!! LOL
  4. E

    MOMO steering wheel vs airbag

    If you always wear 5 point harnesses does the airbad do anything for you? I'm guessing no? Opinions?
  5. E

    97 GTS on E-Bay

    $2000 will fix that!
  6. E

    Mopar PCM failed to add power

    OK, Just got back from doing 8 dyno runs, comparing a Stock PCM to the Mopar PCM. We used the same Mopar PCM on both cars being tested. MY car, a 97GTS, with 1.7 rollers, polished/ported heads, high flow cats, 3" Borla style exhaust, Ballenger Headers, K&N's and Smooth tubes. With the...
  7. E

    Brand new viper gts, broken heater... Any suggestions?

    I hear removing the cats severely limits the heating capacity of the side sills. Make sure someone didn't steal your cats!
  8. E

    Add T&D's and lost 20RWHP!?!? WTF!!!

    Re: Add T&D\'s and lost 20RWHP!?!? WTF!!! Monnieh, You know, this suggest that the car is breathing LESS air after you installed the T&D's. Maybe they are not real? Maybe they are the special LOW LIFT rollers. What was the source? How much did they cost... LOL!!!
  9. E

    Results of WA dyno day - long

    '99 GTS, 20,500 miles, K&N air box with cones, ported/polished heads, T&D roller rockers, Belanger headers, high flow cats, 3" Corsa cat back - 511.2 rwhp& 522.7 torq. Do you happen to know what the FA ratio was for the above car, and if it was running a Mopar PCM?
  10. E

    Looking for a mopar computer

    What do you need it for? Are you planning on using it with the Roe SC?
  11. E

    Cat Back installed. Should I reset the computer?

    How many additional dyno pulls did you do? 8hp = only 2% delta between runs... Was the 8 hp gain over the entire run, or just the peak hp reported? I ask because the peak figures are sometimes misleading when you look at the squiggle of the curves, and also sometimes right at the end of the...
  12. E

    Cat Back installed. Should I reset the computer?

    How did you "PROVE" this at the dyno??? The PCM runs OPEN loop at WOT. The learning has to do while in closed loop at partial throttle. At WOT the PCM runs from preprogrammed maps that are not learned. The PCM is flash and EEPROM based. There are NO large capacitors or back-up batteries in...
  13. E

    Add T&D's and lost 20RWHP!?!? WTF!!!

    Re: Add T&D\'s and lost 20RWHP!?!? WTF!!! Monnieh, How rich was your car running? Let me know when you are going to the dyno next. I'd like to meet you there. Paul
  14. E

    Salvage Title Vipers

    The fact is that it takes a very competent mechanic to do quality repair to a damaged Viper. There are very few mechanics like this. We hear the horror stores about simple repairs being botched on cars. I'm sure there are some salvage Vipers that have been repaired very well. There are also...
  15. E

    Are high flow cats all the same?

    Question: "Are high flow cats all the same?" Answer: No- some cost a LOT more than others! :-o Mine were $70 a piece NEW. And I was there on Saturday dynoing my car along with all the other "low readings" at 485 RWHP :-)
  16. E

    Anyone trying to make money rebuilding a viper- Look at this:

    If you are thinking about rebuilding a Viper with a Salvage title, maybe you should check out the price on this 2000 with 13K miles and salvage title: $44K! Ouch! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2406838965&category=6209
  17. E

    Will the Mopar CPU help in this application?

    Last Saturday the North Texas VCA hosted a dyno event. My GTS registered 485 RWHP and 518 TORQ. The graph showed the Air Fuel ration as about 13.5 to 13.3 from 4500 to 6000 rpm. This is on the lean side. The question is, will the Mopar computer help me on this car? My car has...
  18. E

    Xenon Headlight Kit

    Re: i have an extra xenon kit for sale Driving 80+ mph on the freeway is also NOT DOT aproved. Doesn't stop me. :-)
  19. E

    What's the rubber diaphram in clutch master for?

    What\'s the rubber diaphram in clutch master for? About a year ago I had fun doing a complete flush of the hydraulics for the clutch system, (97 GTS). A year later, the fluid in the reservoir is black again. It looks to me like this is coming from the black diaphram in there disintegrating...
  20. E

    Worst day of my life I lost my snake!

    Is that real?? If so do you have an original NON compressed image?
  21. E

    Worst day of my life I lost my snake!

    Some 12 year old kid wrote: Boy do I feel duped! I actually thought this was a real thread until I read this. This thread more than ever makes me wish there was a button on my keyboard. When I press it I'd like to be able to send a high voltage shock to the person at the other end. I'd...
  22. E

    Can somone run a carfax for me?

    Thanks! I thought something was a little fishy about the car. You can view it on ebay. WARNING! This has to be the UGLIEST 930 you have ever looked at. Sorry it's not a Viper. I'm looking for something other than the GTS to track. I had fun racing the GTS last weekend at TMR, but...
  23. E

    Can somone run a carfax for me?

    Hi, Can someone run a carfax for this vin? WP0JA0934BS050048 Thanks!
  24. E

    Pulled on the way to work - Aargg!

    Yeah. Right. About as easy as driving a Geo Metro.
  25. E

    Am I the only one who finds flashing avatars annoying?

    UBB17-ML-237092-ML- Off Topic

Latest posts

Members online

Total: 957 (members: 43, guests: 914)

Forum statistics

Threads
153,843
Posts
1,686,701
Members
18,455
Latest member
Mando9595

Share this page

Top