Search results

  1. M

    Pressure Bleeders--psi?

    I have always heard 20psi maximum so I usually pump mine up to 15psi just to be a little conservative. With a few years use on 3 cars I've never had a problem. MGH
  2. M

    Installed New Headers

    Just installed a new set of Hooker headers on my '96 RT/10. They are ceramic coated so will be a little cooler than stock. I have Magnecor wires and was wondering if most people remove the little heat shield tubes from their plugs? When istalling headers, do most leave off the heat reflective...
  3. M

    differencial fluid and additive

    Call Redline 800-624-7958 and ask for a dealer close to you or just do a google search and purchase it online. Most places are fairly close on price but shipping can vary. MGH
  4. M

    differencial fluid and additive

    I use Redline 75W140. It already has friction modifier in it. MGH
  5. M

    Mopar PCM?

    I have a '96 RT/10 which I understand is a Gen1 body and engine with a Gen2 PCM and suspension. Kind of a bastard year. Will the Mopar PCM do anything for me? Is is compatible? Thanks, MGH
  6. M

    HP vs Crank Weight?

    That is true although 2.7 HP seems a little high for each pound. One of the problems with the lighter pulleys are that the Harmonic balancers on the front of the crank are reduce just that, harmonic vibrations. By lightening the pulley's without rebalancing the crank can instill more harmonic...
  7. M

    Original Shifter

    I've got the stock shifter but am using the stock knob on my B&M. Shifter for free, shipping $10? MGH
  8. M

    Slotted/Drilled Rotors on Ebay...

    Drilled are Ok for the street but not for the track except... Porsche factory rotors that are drilled actually have the holes cast in, same for Ferrari. They hold up much better than drilled rotors as having them cast in tend to stress relieve them. There is supposedly a slight reduction in...
  9. M

    Handbrake during winter storage?

    Good point Santos, I don't set the parking brake on my cars in the garage when they won't be used for a while. MGH
  10. M

    Brake bleed

    Better than the Speed Bleeders is to purchase a Motive Power bleeder and the Master cylinder adapter kit. While your at it might as well purchase the cap for the clutch too. Easier on your Master cylinder without all of the pumping. When you pump bleed your brakes by pumping the pedal, you tend...
  11. M

    oil change, what weight?

    I second the opinion that in Cal. I would go to a thicker oil. If you want to stick with Mobil 1, use the 0W40 as it has much better HTHS (High Temp High Shear) rating. Just check the Mobil 1 website. Although a much better oil is Redline in either 10w30 or even 10w40 in the Sacramento summer...
  12. M

    Whats the gift for rejoining VCA?

    Oh yea, with my application I received the Viper sweepsteaks form that needed to be returned by 2 Dec. Well, I received the form on 2 Decemeber so it was a little late. Did anyone else receive theirs extremely late like me? MGH
  13. M

    How does one reset the PCM?

    Anyone know what plug size will fill the void if I just want to pull the whole solenoid rather than just unplugging it?
  14. M

    Redline in transmission?

    If you look at their website they show the Redline D4 ATF as recommended for the T-56 Vette. Well, they don't mention the Viper as their isn't a lot of them compared to Vette's but it is funny they recommend a different oil for the Vette with the same tranny. They told me the difference in their...
  15. M

    Transmission fluid

    slaughterj, I see you have Mobil 1 10W30 for engine oil. If you check the Mobil 1 website and look at the Tech specs. The newer Mobil 1 0W40 has a higher High Temp High Shear(HTHS) rating than the 10W30. This is a newer European rating for high output engines which provides greater protection...
  16. M

    Transmission fluid

    The reply I recieved from Redline Oil was to use their D4 ATF or 1/2 MTL and 1/2 MTL90 in the tranny and use their 75w140 in the Diff. I have about 500 miles on their new Lightweight Shockproof gear oil in the Diff but just ordered their 75W140 due to their recommendation and the fact that their...
  17. M

    Fuel system cleaner?

    I only use Chevron Gas and I've inspected the injectors on some of my cars and they were all as clean as new. Ditto on what DevilDog said though, if you use the Techron Concentrate, do it on a tank just before an oil change. Both Porsche and Mercedes recommend Techron in the U.S. Mark Hahn '96...
  18. M

    What are your winter Mod Plans?

    Hedman Headers with Borla exhaust,probably remove the cats. Possibly Jesel rockers. Maybe a PCM upgrade from West Coast Viper. ? who knows what else. MGH
  19. M

    front license plate bracket

    I live in Washington State which requires a front plate but don't have one on any of my cars and have never had a ticket. A couple of warnings in the last 10 or 20 years but never a ticket. Doesn't match the style of the car very well. MGH
  20. M

    I bought my first Viper... Now what???

    Congrats, I just bought my '96 w/13K 2 months ago. I couldn't wait either so I flew back to NJ and drove it back. Already put a K&N intake system on it, BBS 18" wheels with new Pilots, New Intrax springs, slotted rotors and Hawk pads, Hedman Headers and Borla exhaust (Headers and Borla) not...
  21. M

    Coputer upgrades

    I hear a lot about the Vec 1 or Vec 2. Has anyone tried West Coast Vipers PCM upgrades or JET performance computer upgrades (send in your PCM)?
  22. M

    DOES ANYONE HAVE INTRAX SPRINGS?????????????

    Sorry for the late reply. I haven't had a problem yet with the inadequate spring length but I don't drive my car that much this time of the year and I just installed the springs a month ago. Intrax claims 1" drop front and rear and I would say that is pretty close, maybe a little less. MGH
  23. M

    Gen 1 vs. Gen 2 fuel injectors

    Anyone know what the difference is between Gen 1 vs. Gen 2 fuel injectors? Is there any performance gain. What if the exhuast/intake are upgraded in a Gen 1 engine? Thanks, MGH
  24. M

    Type of oil

    I've been a Mobil 1 fan for years as I get a discount from a local supplier. Recently I've learned of some new European oil requirements which are much stricter than API standards. The standars are the ACEA A3 and the HTHS (High Temp High Shear) standards. For example, only the Mobil 1 0W40 and...
  25. M

    DOES ANYONE HAVE INTRAX SPRINGS?????????????

    I have a set of Intrax on my car. Happy with the spring rate, not noticably stiffer than stock. Happy with the rear spring install, unhappy about the fronts. They have slop that at full extension could let the spring rotate and get slightly out of place on the perches. Most high Qual. springs...
Top