Search results

  1. GTSnake

    3D print an interior door sill plug

    Wow, 50 pieces! If someone buys these you can send the rest to the other Viper brothers.....
  2. GTSnake

    3D print an interior door sill plug

    Care to share the link?
  3. GTSnake

    3D print an interior door sill plug

    those look like a pretty standard item as well.
  4. GTSnake

    3D print an interior door sill plug

    Oh those plugs... I thought they were under the door. This is why I don't like other people working on my car.
  5. GTSnake

    3D print an interior door sill plug

    Just curious when would you need to pull that plug. In case the door is flooded?
  6. GTSnake

    passenger side window quit working

    Try to find a picture of what the window pin looks like. It's like an arrow with the clip going around the shaft of the arrow. Once you pull the pin you just need to push/pull out the arrow from the carrier.
  7. GTSnake

    Viper Tech in Austin Texas

    I have the same mentality. I've had to do most of the work myself but some times you just wish there was somebody you can trust to do the job.
  8. GTSnake

    Viper Tech in Austin Texas

    Chrysler engineers would have stroke if they read this. lol
  9. GTSnake

    Viper Tech in Austin Texas

    Yes and No. Sure it's an ICE car just like everything else out there but Vipers are basically hand built low volume craft cars. So there are many systems unique to Vipers such as engine controllers, body packaging, not to mention 2 more cylinders. How many other cars have an 8+ liter V10...
  10. GTSnake

    Viper Tech in Austin Texas

    I tried them. They don't roll out of bed for anything under $10k. They only do big jobs.
  11. GTSnake

    Viper Tech in Austin Texas

    Thanks for digging this up. I'm looking for one around ATX too. I'm guessing that Chris isn't around anymore?
  12. GTSnake

    passenger side window quit working

    the window is held onto the carrier with a push in pin. You have to push the window pin out of the hole I believe it was toward the outside of the door. Don't lose the foam pad that is sandwiched between the window and the carrier.
  13. GTSnake

    passenger side window quit working

    Check your wiring at the door hinge. Although passenger side less likely to break but it's still a weak point.
  14. GTSnake

    Door trim bezel covers.

    For $200 I'll have to buy a 3D printer and make my own.
  15. GTSnake

    Best place to tap onto battery voltage:

    I think if you cut power for a short time the PCM won't reset. It's no different than changing a battery. But if you cut power for a long time it will reset. I think there's some capacitors or some residual power storage in there but not sure.
  16. GTSnake

    Best place to tap onto battery voltage:

    Yup it's in the lower driver side behind that little panel cover. Can't remember exactly which circuit but I usually pick something like interior lights or something harmless.
  17. GTSnake

    Best place to tap onto battery voltage:

    I've always just tapped the fuse box in the lower left side of the IP.
  18. GTSnake

    96 RT/10 thats for sale in Michigan

    With 388 miles on it it hasn't been out in public very much. I can't say that I've seen it. Grand Rapids is halfway between Detroit and Chicago. So it may have been known in Chi town.
  19. GTSnake

    Heavy Exhaust Odor in Cabin While Driving

    You get a lot more exhaust fumes when you get rid of cats. If I stand in a garage even with door open my eyes start to water after a few seconds. Tacos would only affect the situation if they were accompanied by beans.
  20. GTSnake

    Gen 2 Window Regulator Clip Shuttle Replacement: are there good ones?

    Why did you need to replace them? Were they worn out or window motor labored in pushing it up? Maybe the tracks are out of alignment with the path.
  21. GTSnake

    GTS parts manuals pdf

    I usually look it up on Rockauto. They have most of the part numbers listed.
  22. GTSnake

    Why does my parking brake get loose?

    So have you fixed it or just leave it as is and keep pumping the handle each time?
  23. GTSnake

    Why does my parking brake get loose?

    Well I guess it's time for a brake job anyway.
  24. GTSnake

    Why does my parking brake get loose?

    Sometimes when i pull my parking brake it seems the wire is really loose. The handle pulls all the way to almost vertical. Then I pump the handle again and it seems like it spools up and the tension is tighter. Then the handle gets tight around 10 oclock. Is there a spring or something that...
  25. GTSnake

    New Gen 1 parts are being made!!!

    where do I find them?

Latest posts

Members online

Total: 1,355 (members: 14, guests: 1,341)

Forum statistics

Threads
154,442
Posts
1,691,055
Members
19,184
Latest member
MakinWaves

Share this page

Top