Search results

  1. pokeyl

    Roe Throttle Body Butterfly Mod

    Do you want G-code or SLT?
  2. pokeyl

    Roe Throttle Body Butterfly Mod

    Short answer. Some trigonometry to get a 15 degree seat angle, and .2mm longer. My stock blade has .1 to .2 mm gape all the way around (second pic). The IAC did not have a RPM vote at idle. Works perfect now. Even solved a nasty surge at 2000 RPM in low gears. I am running a 710r cam, BB...
  3. pokeyl

    Roe Throttle Body Butterfly Mod

    DMC Mini2
  4. pokeyl

    Roe Throttle Body Butterfly Mod

    The Roe Racing supplied throttle is not sized correctly. When I called Roe, the reply was "It's smaller then the bore to eliminate the chance of binding/sticking." That was 5 years ago. This makes the IAC circuit almost useless. I recently bought a small benchtop CNC mill. After a huge...
  5. pokeyl

    Clutch Bracket

    Seat out is a Good Idea!!! I did not do that and had to stand on my head and TWIST!
  6. pokeyl

    Clutch Bracket

    How long did it take you to install?
  7. pokeyl

    Clutch Bracket

    I could put a torque wrench on it and get a true % ???
  8. pokeyl

    Clutch Bracket

    My wife has a 2015 Hellcat (MT6 of course) feels like that. Firm but not heavy. It is much better. Easy to install, after you get standing on your head in the footwell! If you pull the seat it would be super easy.
  9. pokeyl

    Clutch Bracket

    Anyone else have one. It works perfect! https://remspeedeks.com/collections/gen-3-4-dodge-viper
  10. pokeyl

    2004 Differential

    I have a Wavetrac in my car. Huge improvement. Going on 4 years now. I got mine before Co-Vid supply line shut down happened.
  11. pokeyl

    Aftermarket side mirrors.

    Finished Drop Box Link below Mirror Vid
  12. pokeyl

    RB1 Head unit navigation antenna?

    I have am extra RB1. I did not hook up the Nav Ant. Just plugged it, worked fine.
  13. pokeyl

    2006 Coupe Proper Underhood Ground Point for Jump Start?

    Water pump housing works for me!
  14. pokeyl

    Hard Start Gen 3

    Can do. the only Part I have not changed is the pos-bat cable the runs to the starter. I did add a jumper cable from the battery to the pos post under the hood. No Change. I still thing it is what I am asking of the car. Many starts with almost ZERO recharge time. The alternator is...
  15. pokeyl

    Hard Start Gen 3

    The Root cause is starting the viper 20 times, with only a 2 min autocross run to recharge? At the end of the day it wont start. The heat makes it worse. If I drive around town there is never a problem. If I take the relay fuse box cover and open the hood it helps. (bad in the rain) Swap...
  16. pokeyl

    Hard Start Gen 3

    My Bad. I have had 3 new batteries in the car AGM, standard lead acid, and Litho-ion. some rated as high as 950 CCA. Problems with all of them. I have not changed the positive battery cable.
  17. pokeyl

    Hard Start Gen 3

    Finished
  18. pokeyl

    Hard Start Gen 3

    Anyone having problems starting any time the battery is not fresh from the charger? I have found the voltage drop when starting makes the starter relay chatter!!! Hard to start. I have changed the Starter and ground cable at the battery. As well as the starter relay, No Difference...
  19. pokeyl

    Corner Balance

    Yes, on the Left Rear and Right Front. Cross weight was off 2.5% but the ride height looked good???? Setup Pics with laser level. Took longer to set the pads as my garage floor is not level. I did not expect the cross-weight to stay that close from "empty" to "driver".
  20. pokeyl

    Corner Balance

    Finished Today
  21. pokeyl

    Corner Balance

    Just picked up a race car weight system. Any advice? I'm going for 50/50, left,right with me in the seat. Front to back looks like 49/51 front/rear. Cross will be 50/50
  22. pokeyl

    Cam questions

    I did my own Cam, Exhaust, and Heads Labor. Money I saved did a bowl port. Is the tune included? 238/246 @ 0.050'', 114 LSA, about 0.600... Roe 710r cam 620 at the wheels
  23. pokeyl

    Motor Mount time any Wisdom

    I did not remove anything but the front crossmember. With the car on jack stands, I used an Impact gun to snap off the bottom bolt! at this point you are committed to the change. Jack the motor to support and remove the 3 bolts holding the mount to the engine. Remove and finish taking the...
  24. pokeyl

    Motor Mount time any Wisdom

    All done, WOW, shifter dose not move under throttle AT ALL.
  25. pokeyl

    Motor Mount time any Wisdom

    What heat shield are you using for the poly mounts? (non woodhouse) I was thinking muffler repair tape

Latest posts

Members online

Total: 1,216 (members: 15, guests: 1,201)

Forum statistics

Threads
154,443
Posts
1,691,058
Members
19,184
Latest member
MakinWaves

Share this page

Top