Search results

  1. R

    Cloudy, Scratched Headlights! How to polish them or do I?

    Try Wal Mart; my son and I did his non-Viper a couple years ago with a kit fro Wal Mart. I think the kit was $19.95, and included all the sand paper, and polish and sealant required. Later,
  2. R

    New Brakes Question - 2000 Non Ebs Gts

    You can see I posted this back in 2005 after installing Tom's 40mm rear brakes. Since then, MANY sets have been installed on Vipers all across the country, with, I am sure, wit the same or better results (race tires, slicks)...
  3. R

    Lunch with JonB – PartsRack

    What a delightful time; my wife and I had the privilege of having lunch with JonB and his assistant at a floating restaurant on the Columbia River. The day was beautiful, with not a cloud in the sky, and Mt. Hood, in all its majesty was in full view, and was just beautiful. We also visited his...
  4. R

    skip shift gen 1

    I unplugged mine 7 years ago; no check engine light, or anything. Just unplug, cover well with tape, and go. The amber dash light will still function, but who cares, ignore it. Later,
  5. R

    Gen II exhaust on Gen I

    As Tom said above, here is a picture: Cut braces out - both sides.
  6. R

    With a SAD heart, I must say goodbye to the Viper World

    All, It is with a sad heart,:mad: that I must say goodbye to 7 1/2 years of fun and enjoyment to the Viper World. I had a crash as a result of a right rear tire failure, and did so much damage that it is not feasible to fix it. The insurance company totalled the car, and I had the option to buy...
  7. R

    Events Notification

    Since we are talking communication methods, James, you have an old fashioned E-mail I just sent you. Later,
  8. R

    How can I 'fool' the coolant temp sensor

    From it's own sensor. Dial in (relative to the temperature gauge) the temp desired for the fan to come on. Dodge Viper Fan Control Kit - 92-96 RT/10 - Cooling - Roe Racing Great piece. Later,
  9. R

    18inch SSR wheel and tire question

    Try the toyo proxes r888 tires, they have the correct sizes Toyo Tires - Proxes R888 Later,
  10. R

    How can I 'fool' the coolant temp sensor

    Get the Sean Roe Adjustable fan control, and set the temperature for the fan to come on wherever you want. Later,
  11. R

    CANT get any lockable gas caps to work!

    NAPA Part Number: 703-2103 Cost me $10.49 in 2002; still locks, works perfectly. Later,
  12. R

    Help! Sync Throttle Bodies???

    Have you oiled your air filters lately? Clean out the throttle bodies. Remove the air inlet tubes, and look inside the throttle bodies, possibly oily and dirty. Clean, and clean the shafts (WD40, contact cleaner,.....). Cured my pulsating, which was primarily at idle. Later,
  13. R

    1992-2002 New spin on the old fan Radiator Fan Control Kit… Now fully adjustable!

    Completed upgrade installation; piece of cake. Works as advertised (never had any doubts). Later,
  14. R

    My new Tom's 40mm rear calipers!!!

    Bravo, Go here and read real experience about the brakes - you will be VERY happy. I have had Tom's brakes for 3 years, and haven't looked back. http://forums.viperclub.org/rt-10-gts-discussions/579232-thanks-tom-thanks-tom-thanks-tom-brakes.html Read the complete post. Enjoy.
  15. R

    Install of factory A/C, new dash and shifter (pics) THANKS TATOR'S!

    NOW keep your feet COOL as well - see pictures - self explanatory The flexible tube is an old vacuum cleaner hose, long enough to route to the firewall and curve down onto you feet. You can also put the small (about 3"), flared vacuum attachment to "spread the air. I did this to both...
  16. R

    1992-2002 New spin on the old fan Radiator Fan Control Kit… Now fully adjustable!

    You guys are too much! I actually ordered mine before the link went up on the site, and so you all can argue who has #000000001, #000000002, #000000003, etc, etc, BUT in reality I have # -000000001. Oh well !! I'm sure we will all realize a plus from the mod, regardless of the number. Later,
  17. R

    Stock head flow cfm?

    YES, my example starting with .500 CAM lift was a poor choice and should have been in the .350 +/- range for 1.6 ratio rocker arms. Was merely trying to show that the actual cam ground lift times the rocker arm ratio gives the valve lift. And measuring flow at valve lifts way past the...
  18. R

    Stock head flow cfm?

    SquadX, You said: Remember the rocker arms are ratioed, such that the cam lift is multiplied by the ratio of the rocker to give valve lift. Simple example: Cam Lift = .500" Rocker arm ratio = 1.5 Valve lift = .500 x 1.5 = .750" or with 1.7 ratio rockers Valve lift = .500 x 1.7 = .850" Later,
  19. R

    Weird engine problem

    Try reading this - I know it is quite long, but worth it if you are having the same problem described, and the ultimate solution: http://forums.viperclub.org/rt-10-gts-discussions/593276-high-rpm-engine-shuts-off-should-easy-fix-tell-me-what.html Later,
  20. R

    Looking to buy a '96 RT/10 Service Manual

    I posted this on July 5th: http://forums.viperclub.org/rt-10-gts-discussions/615958-shop-service-manusls-96-rt-10-96-gts.html
  21. R

    1992-2002 New spin on the old fan Radiator Fan Control Kit… Now fully adjustable!

    WOW, I didn't realize I have had mine installed since August, 2005 (invoice #8284); I guess when something (fan kit in this case) is working, one just takes it for granted. My kit is for 1992 - 1996 RT/10, not sure of any real difference for GEN II, except perhaps wire lengths. Yes to DIY...
  22. R

    1992-2002 New spin on the old fan Radiator Fan Control Kit… Now fully adjustable!

    Sean, Sounds like the mod everyone should have that has a fan kit. I am with Dave, (" ..... how about a field service update kit for the DIY"), mine is all wire loon installed, and of course I need it now that we have some hot weather here in the Northwest (yes 85-90 deg.) Just my thought, and...
  23. R

    Stock head flow cfm?

    The answer to your question is in the form of a question: Are all flow benches the SAME? NO One flow bench relative to another flow bench has very little meaning. One flow bench relative to itself has significant meaning when making port/combustion chamber changes, valve size changes, valve...
  24. R

    Shop Service Manusls: 96 RT/10 & 96 GTS

    Anyone interested: eBay Motors: 1996 Dodge Viper RT/10 Factory Shop Service Manual (item 220252092274 end time Jul-07-08 10:16:08 PDT) eBay Motors: 1996 Dodge Viper GTS Coupe Factory Shop Manual (item 220252092885 end time Jul-07-08 10:17:41 PDT) Not always the easiest to find. Later
  25. R

    Tach lead out of the ECM

    Pictures of Tach wire from PCM connector:

Latest posts

Members online

Total: 902 (members: 10, guests: 892)

Forum statistics

Threads
153,189
Posts
1,681,847
Members
17,684
Latest member
Liberty235

Share this page

Top