CANNOT GET MY H - M - S VENOM BUMPER ON!! PLEASE HELP!

[VENOM600HP]

Okay..very frustrated I am..very!

i can get one side of the bumper on where the bolts go on in front of the wheel, but CANNOT get the other side on the car! looks like its about one inch too short.

PLEASE any suggestions???

Please dont flame or say "told you so" I just spent alot of money and I am very upset.

Thankyou
Patrick
1993 VENOM 550

 

[VENOM600HP]

Also it looks as though the foglights cant even be put in.....this ***** !

 

[Gerald]

Perhaps the wrong "year" bumper was purchased? If so, refund?

G

 

[VENOM600HP]

nope, only one bumper to fit all vipers except 2003

 

[Supercharged Vipermad]

You have mail.

 

[Daniel Cragin/DC Performance Inc]

I feel your pain. We have had a hard time putting these on, but they do fit. First, put the bumper out in the sun and it will bend a little.Then with two people you will need to persuade it on one side.

 

[GR8_ASP]

I do not know anything about the H'essey fascia. The stock one could be a real difficult stretch to get it fully installed. The foglamp issue may be due to the year. I am pretty sure the fog lamps changed after 1993 so you may need later version and mounting hardware. There must be someone here who has done this installation and can help.

 

[Austin]

Go to www.Viper Alley.com (take out the space) and post this problem there. John H E N N E S S E Y post there frequesntly. He should help you with your problem.





Austin

 

[Mike Brunton]

I'd also recommend going to the alley. No slam against this site, but JPH isn't allowed on here, and he has offered to help over there - may as well talk to the source and see if you can get some info. I'm sure any tricks of the trade, John will be aware of.

 

[C O D Y]

You might need to grind the front bumber support down 1/2" on each side. That is what I understood when I was thinking of getting one.

 

[JGK95]

JH, is waiting for you at the Alley with a post entitled with your user name.

Jay K.