DanB
Enthusiast
1. Disconnect negative battery cable. Find battery first. If you were looking under the hood please stop what you are doing.
2. Disconnect the intake air temperature sensor electrical connector from air cleaner. Remove throttle body hoses and air cleaner assembly.
This step was done previously when I was taking apart car for other work. Pics for reference.
3. Disconnect throttle cable and move to the side.
4. Disconnect PCV and canister purge hose harness bundle located between throttle bodies.
I was unsure if it was just the shorter ones between the throttle bodies or both the shorter ones and the longer ones running from valve cover to valve cover. I took off long and short ones.
5. Disconnect throttle position sensor wiring connector from left throttle body.
6. Remove brake booster hose from air intake plenum.
7. Disconnect idle air control motor (IAC) electrical and hose connection.
I previously had removed hose.
8. Remove the windshield cowl cover. Lift plastic cover at wiper arm base to reveal nut.
I found just pulling up on it didn't work. I stuck a small pick near the pivot area and tha helped to open up the cover and enable it to be pulled up.
While removing mine I found my passenger plastic cover was cracked. If anyone has an extra let me know. I believe it only comes when you buy the arm for $150.
You must be registered for see images attach
2. Disconnect the intake air temperature sensor electrical connector from air cleaner. Remove throttle body hoses and air cleaner assembly.
This step was done previously when I was taking apart car for other work. Pics for reference.
You must be registered for see images attach
3. Disconnect throttle cable and move to the side.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
4. Disconnect PCV and canister purge hose harness bundle located between throttle bodies.
I was unsure if it was just the shorter ones between the throttle bodies or both the shorter ones and the longer ones running from valve cover to valve cover. I took off long and short ones.
You must be registered for see images attach
You must be registered for see images attach
5. Disconnect throttle position sensor wiring connector from left throttle body.
You must be registered for see images attach
You must be registered for see images attach
6. Remove brake booster hose from air intake plenum.
You must be registered for see images attach
You must be registered for see images attach
7. Disconnect idle air control motor (IAC) electrical and hose connection.
I previously had removed hose.
You must be registered for see images attach
You must be registered for see images attach
8. Remove the windshield cowl cover. Lift plastic cover at wiper arm base to reveal nut.
I found just pulling up on it didn't work. I stuck a small pick near the pivot area and tha helped to open up the cover and enable it to be pulled up.
While removing mine I found my passenger plastic cover was cracked. If anyone has an extra let me know. I believe it only comes when you buy the arm for $150.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach