Correct. Theres a 2 prong clip that holds the bulb into the back of the lense housing. There's a rubber gasket that seals the clip and the wiring that sits over the back of the lense. Pull the housing back from around the lense (rearward towards you). Under the gasket, you will see the clip. If I remember correctly, you need to push both ends down (forward) and in towards each other the disengage the ends. The bulb will then pop out the back (rearward) with a little yank on the wire.There is a clip at the back of the bulb. Pop that off and out she comes. The housing does not come apart.