GEN3 Brake Rotors

[Schulmann]

Question: are the front and rear rotors the same on a GEN 3 VIPER (2006 Coupe) (Diameterand thickness ) ?

Can I fit a front rotor into the rear ?

 

[Flexx91]

Question: are the front and rear rotors the same on a GEN 3 VIPER (2006 Coupe) (Diameterand thickness ) ?

Can I fit a front rotor into the rear ?

Check the part numbers to see if they're identical.

 

[mjorgensen Woodhouse]

They are different in the offset of the "hat" so the answer is no.

 

[Ricketts]

They are different in the offset of the "hat" so the answer is no.

And this man would surely know!

 

[Schulmann]

I finally found the specs ...

FRONT
Diameter: 355mm
Offset: 59.6mm
Thickness: 32mm



REAR
Diameter: 355mm
Offset: 52.2mm
Thickness: 32mm


The bolt pattern is the same for boot: 6x73.5

(NB: I fixed the description ... thanks guys.)

 

[10 BANGER]

I finally found the specs ...
Front
Diameter: 355mm
Offset: 59.6mm
Thickness: 32mm


Front
Diameter: 355mm
Offset: 52.2mm
Thickness: 32mm


The bolt pattern is the same for boot: 6x73.5

Front and Front????

 

[treesnake]

They are different in the offset of the "hat" so the answer is no.

Mark
Is that your new car in your Avatar?

 

[SilveRT8]

I finally found the specs ...
Front
Diameter: 355mm
Offset: 59.6mm
Thickness: 32mm


Front
Diameter: 355mm
Offset: 52.2mm
Thickness: 32mm


The bolt pattern is the same for boot: 6x73.5

Andras, wich FRONT is in the REAR ????

 

[mjorgensen Woodhouse]

Mark
Is that your new car in your Avatar?

No, I like it, but could not use this

You must be registered for see images

LOL