wormdoggy
Enthusiast
I installed the Belanger headers , high flows and exhaust about 4 months and 1500 miles ago and its seems the car hesitates on acceleration between the 3000-4000 RMP range. This has been happening from the initial install.
It does not happen when I accelerate slowly but at WOT I notice a different pitch on the exhaust note ( more muffled ) and hesitation until it passes the 3000-4000 RPM range and then it seems to be fine.
The HP seems good when I got it dynoed. 30 HP more then a stock 2004 Viper with Corsa.
One guy even commented on my exhaust at a stop light. He was driving a Vette and I just punched it. At the next light he asked me if I changed the exhaust. He said he thinks I'm running rich.
I am just wondering if I need to reflash the computer?
The only other mods are green filters and boots socks on the plugs.
Thanks for your help.
Patrick
It does not happen when I accelerate slowly but at WOT I notice a different pitch on the exhaust note ( more muffled ) and hesitation until it passes the 3000-4000 RPM range and then it seems to be fine.
The HP seems good when I got it dynoed. 30 HP more then a stock 2004 Viper with Corsa.
One guy even commented on my exhaust at a stop light. He was driving a Vette and I just punched it. At the next light he asked me if I changed the exhaust. He said he thinks I'm running rich.
I am just wondering if I need to reflash the computer?
The only other mods are green filters and boots socks on the plugs.
Thanks for your help.
Patrick