Innovate Wide Band

[BlueGTS]

I am programming my 2nd Innovate wideband in the passenger bank and I have a question. I am duplicating my setting from the one I installed last year but now I am wondering if I put the correct parameters in. Does this look right?

0.00 Volts = 10.00 AF
5.00 Volts = 17.99 AF

I believe I received these settings from Sean but I can not find the email and today is Saturday. I want to test my new 10psi pulley but also want to make sure I am set up correctly. Thanks in advance to anyone who double checks the numbers for me.

 

[Schulmann]

Actually in the WBO you can set the Volt output.
Check the WBO's manual.

 

[BlueGTS]

Actually in the WBO you can set the Volt output.
Check the WBO's manual.

That is exactly what I did. I logged into the Innovate and adjusted the output. I just wanted to make sure the settings I posted were correct.

On another note, do you notice that your boost starts ~2psi below its max and works its way to the max boost from a 3k-5k pull? I don't know why but my boost shoots up to about 2psi below its max when I hit it and I gain the additional 2psi as I approach 5500. Have you noticed that on your car?