Meguiars M105?

[jc411]

anybody use Meguiars M105 on their Viper?

is this too much for the Viper clearcoat?

how about Menzerna SIP? I heard SIP does not cut that much... I hear 105 cuts the hardest...

 

[uvbnbit]

anybody use Meguiars M105 on their Viper?

is this too much for the Viper clearcoat?

how about Menzerna SIP? I heard SIP does not cut that much... I hear 105 cuts the hardest...

I think it would depend on the pad used, machine, pressure, time, etc. Also, the correction that's needed to be done. I've used M105 before and it seems to be effective. (even by hand)
Maybe follow the 105 with the SIP?

 

[Newport Viper]

Here is what we learned to be the perfect combo by Meguiar's. The Viper paint is very hard to buff. This works perfect..... pictures on first page, products on second page MEGUIAR'S DETAIL DAY - May 2, 2008

 

[silverz06vette]

I think it would depend on the pad used, machine, pressure, time, etc. Also, the correction that's needed to be done. I've used M105 before and it seems to be effective. (even by hand)
Maybe follow the 105 with the SIP?

When used properly M105 can be used with a PC to remove some deep defects and it also finishes out very well. You can follow up with M205 or any finishing polish.

 

[FLATOUT]

I just cut my whole car with my Flex lightweight Rotary, orange LC pad, and the SIP, and I can tell you in a few spots I either needed to switch to a wool pad, or switch to the 105. The SIP is awesome but I did have a few stubborn areas that got me frustrated.

Andy