Need Some Install Tips Please

[QUICKSRT10/SRT8]

Ok today i finally ordered the mopar performance cat back exhaust system. does anyone have any install tips, suggestions, advice, or even some pictures?? thanks

 

[Art 138]

Try this thread....http://forums.viperclub.org/srt10-s...highlight=mopar+cat+back+exhaust+installation

 

[viperbilliam]

I do believe Corsa has install instructions online for your application. Do have mechanix gloves, a spray can of WD40 or something like it, and a soft mallet for getting the factory system out and it will help to lift the car a bit - get it on jackstands; not required but it will help. Do align the tip carefully and get it towards the front to allow a little room for heat expansion that makes it grow towards the back. Just place the lower fender sills in place without tightening anything when aligning. Taking the front wheels off and remove the wheel well cover can speed things up when trying to loosen the front screws.

 

[QUICKSRT10/SRT8]

thanks i just finished the install. i havent had the chance to drive it because of the rain but i let it run for 30 minutes to heat it up and the tips seem fine. i hope that they remain fine and i dont have any issues of burning my sills

 

[01sapphirebob]

Bet the cabin heat issue will improve.

thanks i just finished the install. i havent had the chance to drive it because of the rain but i let it run for 30 minutes to heat it up and the tips seem fine. i hope that they remain fine and i dont have any issues of burning my sills