C O D Y
Enthusiast
To remove them and a thin layer of clear coat, use the 3M swirl remover. It's abrasive, so be careful.
To fill them in and make it look as if they have been removed, use Zaino Z-5.
If the scratches to deep, you might have to have the car wet sanded. However, I would only do this as a last resort.
You are more than welcome to call me if you have any questions 360-696-7446, or call Sal Zaino at 732-785-2951
To fill them in and make it look as if they have been removed, use Zaino Z-5.
If the scratches to deep, you might have to have the car wet sanded. However, I would only do this as a last resort.
You are more than welcome to call me if you have any questions 360-696-7446, or call Sal Zaino at 732-785-2951
