Removing seats

[wormdoggy]

Ok, since my baby has now been put to sleep its time to give her a little face lift which include the following :

Hood pad install ( new painted Viper logo )
Remove seats and re-upholster
Paint centre dash
Chrome rims
Chrome exterior logo's and roll bars

So my first question is how do I remove the seats ?

Has anyone done this before and how difficult is it?


Cheers
Patrick

 

[steve911]

it is really easy. Slide the seat all of the way forward and remove the two bolts that go down through the seat legs into the floor. slide the seat rearward and remove the 2 front bolts. Tip the seat slightly a look under the seat to disconnect the seat belt indicator wires.

Make sure the top is down and lift up and out.

 

[repiv]

You also have to remove the torx bolt that fixes the seatbelt to the car frame. Overal it is a very easy process, I just did it over the weekend. I was surprised at how heavy the seats are

 

[wormdoggy]

Can always count on you guys to assist the mechanically challenged........

Will post pictures soon ...........

Thanks guys
Patrick