SC RT/10 recommendation for Accusump, any EPC Switch Problems since 2007?

Stahlhart

Enthusiast
Joined
Oct 17, 2011
Posts
56
Reaction score
0
Hi there,

I´m thinking on getting a accusump on my supercharged RT/10.

You must be registered for see images


I read about some problems with the EPC Switch:
http://forums.viperclub.org/threads...danger-of-possible-failure?highlight=accusump

Are there any more problems with the EPC Switch?

I want to by the 3qt High pressure version. What is the correct EPC Valve Kit 55-60PSI, 35-40PSI or 20-25PSI ? In my opinion it´s the 20-25PSI Version while idling I have around 40PSI of oil pressure.

What is the better way, unsing a sandwich plate or using the return line of the oil cooler?

Thanks a lot

Jürgen
 

Jack B

Enthusiast
Joined
Nov 5, 2000
Posts
3,483
Reaction score
0
Location
NE Ohio
Use a splitter at the filter adapter. I will take a pic of my install and post on Sunday.
 
OP
OP
S

Stahlhart

Enthusiast
Joined
Oct 17, 2011
Posts
56
Reaction score
0
Hey,

here are some more pictures of my engine built.

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images


You must be registered for see images

We made this tume with 2 Walbros 255er Pumps and we noticed that they are too small. Now I run the aeromotive stealth 340 Pumps, and we will do a new tune next year.

I also get a new paint on the viper in a few weeks...

You must be registered for see images


@JackB: Which valve kit do you have?

Greetings

Jürgen
 
OP
OP
S

Stahlhart

Enthusiast
Joined
Oct 17, 2011
Posts
56
Reaction score
0
Hi,

still need some informations for my gen1, can nobody help me?

Is it better to use a sandwich plate or the return line of the oil cooler ?
What´s the right EPC Switch? 20-25PSI?

Thanks

Jürgen
 

SingleMalt

Enthusiast
Joined
May 15, 2002
Posts
552
Reaction score
0
Hi,

still need some informations for my gen1, can nobody help me?

Is it better to use a sandwich plate or the return line of the oil cooler ?
What´s the right EPC Switch? 20-25PSI?

Thanks

Jürgen

You really need to talk to Todd at A&C Performance. He has done these installs (I have one -- has worked perfectly since day one).

[h=2]951.696.0500[/h]
Good luck!
 
Top