Spark Plug Wiring remove

[wormdoggy]

Can some one please tell me how difficult it is to remove the spark plug wiring. Do I need to remove the wiper cowl ? I can't for the life of me figure it out??

Thanks
Patrick

 

[ViperGMC]

You have to take off the intake manifold to get to get to the ignition coils. You don’t actually have to completely remove the intake but you will have to remove all the bolts and lift it up so you can reach under and unplug the wires. First time it took me at least an hour to remove the manifold. you don't need to remove the cowl

 

[wormdoggy]

You have to take off the intake manifold to get to get to the ignition coils. You don’t actually have to completely remove the intake but you will have to remove all the bolts and lift it up so you can reach under and unplug the wires. First time it took me at least an hour to remove the manifold. you don't need to remove the cowl

Thanks Viper..............I was hoping I didn't need to do that. Sounds like a complicated process. Just wondering if the benefits of after market wiring are worth the effort.

Patrick

 

[ViperGMC]

Nope, definitely not worth the effort. You will break half the wire clips getting the old wires off and have to replace them or get after market ones, and for no real improvement

 

[Racer Robbie]

i have 12000 miles on my modified viper with stock wires and no problems