T & D Pushrod Length

[SYNFULL]

Hi,
I am installing a set of Roe heads and am putting my T & D rockers on them. The pushrods that I have from my original T & D install are 7.60. Measuring with an adjustable pushrod at TDC on cylinder 1, with the rocker 1 turn down, I am getting a length of 7.579. The heads have been surfaced which probably explains the different length. The next size down that I see available is 7.50. Is it ok to stick with the 7.60??

Thanks!
Gary

 

[99 R/T 10]

You should be fine using the 7.60s. On mine I used 7.65" Just depends on the car.

 

[SYNFULL]

Thanks- Sean said the same thing.

 

[plumcrazy]

and measure more than one .

 

[SYNFULL]

I will do that- Thanks

and measure more than one .