Viper Gauge Pods In Stock!

[1MEANSNAKE]

Here is a picture of our latest edition to our Viper Line-up we have been working on
and In stock ready to ship! We have 24 left from 50 so get them now!

You must be registered for see images

Our gauge pods are 100% OEM fitment and house a single 2 1/16" Standard Autometer
gauge and is perfectly centered on the steering column.

This will be a Non Viper Taxed Item as all of our items will be at $52.50 Shipped in the US

If you are interested in purchasing one, you can Make your purchase here!
Here is a picture of our billet polished aluminum gauge bezel trim rings at
$80 shipped per set of 6! Fits 2nd Gen GTS

You must be registered for see images

If you are interested in purchasing s set, you can Make your purchase here!

I was going to post this in the New supplier section but i haven't been set up yet, ahem Jay, ahem Jay

[email protected]

 

[acrdakota]

Are these the same as the dakota/ram pods? will they work on the trucks?

 

[Qualitywires.com]

Are you going to make one that fits the pillar?

 

[FLX109]

Would you sell them with the boost guage? How much?


FLX109

 

[Supercharged Vipermad]

Would you sell them with the boost guage? How much?


FLX109

I've got a Carbon Fiber one in the Classifieds, just like the one shown above...I'll make you a SWEET deal on.

 

[Joseph Dell]

These aren't the same as the RAM pods... I have a RAM pod and I'm buying this one b/c I like to spend money. but seriously, the RAM one blocks the speedo up to about 40mph... not that i drive the car that slow but i like the idea of it being centered... we'll see if it fits w/ my shift light too...

JD

 

[Supercharged Vipermad]

I have the same a Mr. Dell....as it was he who pushed me down that path. I am anxious to hear/see if this ne pod actually has the mounting holes for the screws, so keep us posted JD!!

 

[FLX109]

Would you sell them with the boost guage? How much?


FLX109

I've got a Carbon Fiber one in the Classifieds, just like the one shown above...I'll make you a SWEET deal on.

thanks Tony, but I would probably want to go white to match the other guages

thanks
again
FLX

 

[Supercharged Vipermad]

Would you sell them with the boost guage? How much?


FLX109

I've got a Carbon Fiber one in the Classifieds, just like the one shown above...I'll make you a SWEET deal on.

thanks Tony, but I would probably want to go white to match the other guages

thanks
again
FLX

Yeah, I figured as much....but thought I'd throw it out there. I did the same thing.

 

[Joseph Dell]

Just got my pod. looks nice! Just like the RAM pod, though, there aren't any screw holes to mount it to the bottom of the steering column (Tony, you know what I'm talking about here). I'll install it sometime in the next week, but I'm pleased.

Thanks!!!

JD

 

[Supercharged Vipermad]

Too bad about the mounts....that would haqve been about the only thing to sway me to change....just to have a little more secure mount to the column. I still might make the change.....but I'll likely bling out with the gauge rings first.

 

[Cal Cobra]

Here is a picture of our billet polished aluminum gauge bezel trim rings at
$80 shipped per set of 6! Fits 2nd Gen GTS

You must be registered for see images

If you are interested in purchasing s set, you can Make your purchase here!

I was going to post this in the New supplier section but i haven't been set up yet, ahem Jay, ahem Jay

[email protected]

Will the billet polished aluminum gauge bezel trim rings fit a Gen1 RT/10?????

Thanks

 

[1MEANSNAKE]

Just got my pod. looks nice! Just like the RAM pod, though, there aren't any screw holes to mount it to the bottom of the steering column (Tony, you know what I'm talking about here). I'll install it sometime in the next week, but I'm pleased.

Thanks!!!

JD

You guys will notice how snug they will fit after installing them

As for the gauge rings fitting the Gen I, i am not sure as we dont have a Gen I nearby to check them on. We will have them shortly for Gen I specific.

Also, it appears that our column gauge pods may be Gen II specific and not fit the 92-95. We will probably run them for the Gen I guys if we can get enough interest!

AB - A-pillars coming soon

FLX109 - we sell Autometer gauges and will probably get a package price together on the Boost/Pod shortly when the website is finally finished!

 

[Shelby3]

Just got my pod. looks nice! Just like the RAM pod, though, there aren't any screw holes to mount it to the bottom of the steering column (Tony, you know what I'm talking about here). I'll install it sometime in the next week, but I'm pleased.

Thanks!!!

JD

What holds the pod in place if there are no screw holes?

 

[Supercharged Vipermad]

What he said------^

I would be pleased if it fit snuggly...but what does secure it in place?

 

[Shelby3]

BUMP for how to secure the pod.

 

[Supercharged Vipermad]

Shelby,
I took some triangle rubber bumpers, you know those little bumper jobbers that come with bug deflectors? I compared my new pod to the stock one, drilled pilot holes in the rubber pieces then golued them where they needed to be. On one of the sides you will need to replace the OEN screw with a longer one, this is because the molded screw hole on the OEM pod/cover acrually extends beyond the edge of the pod/cover.

 

[Shelby3]

Tony, Thanks for the input. I'm disappointed that the pod does not have the screw holes from the vendor.

 

[1MEANSNAKE]

Our gauge pods are computer programmed to fit directly over the existing column very snug. There is no need for tape, screws, glue or anything of the sort. You will not be disappointed with the quality or fitment of our pods or the non Viper Taxed product

 

[Supercharged Vipermad]

Wait...these go OVER the existing column cover??? Hmmm, THAT may very well be a horse of a different color!!! I have moved myself back into being very intersted....sorry I misunderstood the fitment!! Come on JD.....talk to us!!! Thanks 1MEANSNAKE!!

 

[1MEANSNAKE]

Wait...these go OVER the existing column cover??? Hmmm, THAT may very well be a horse of a different color!!! I have moved myself back into being very intersted....sorry I misunderstood the fitment!! Come on JD.....talk to us!!! Thanks 1MEANSNAKE!!

Yes, they snug completely over the factory column cover on the steering column and has the hole cutout for the tilt wheel adjustment and also the cutout for the factory hazard button! Very snug and will not harm your OEM components! We have sold more than 1/3 of our stock and running closer to half of them sold already. I will take an inventory after we ship out tomorrows orders and report back our findings!

 

[Joseph Dell]

hum... i don't actually own my original cover anymore... this could be probelmatic. i'll have to see how it looks w/o that part... i'll let you know next week when i get to it!

JD

 

[1MEANSNAKE]

hum... i don't actually own my original cover anymore... this could be probelmatic. i'll have to see how it looks w/o that part... i'll let you know next week when i get to it!

JD

I dont forsee that being a huge issue, it will probably still work the way it is intended to. Any updates on your progress?

We have these in stock for anyone who would like to purchase one for your Gen II

 

[1MEANSNAKE]

Update: We are running these as a group buy on the Alley and would also like to extend the pricing to you all here at the VCA, they are in stock while they last at this price of only $45 shipped

Get them now!!!!

 

[Andrew2KRT10]

I'll wait for the pillar pod, which I hope will be soon. Tell you the truth, I work with composits and can make it myself, but don't want to be bothered. Depending on cost, I'll buy it when it comes out.

AC

 

[1MEANSNAKE]

We dont believe in Viper Taxation

 

[Joseph Dell]

for the MAD and others... I put the pod on yesterday. It literally pops over the stock upper part of the console. a little double-sided tape and it would be good to go.

MAD - you and I will need to remove the RAM 1500 pod we have an put back the old upper part of the console to use this one. In addition to this, it looks a little "ghetto" if you look at the pod from the side b/c it isn't flush... it is clearly on top of the stock pod. But the fit is good and no one will notice but us.

JD

 

[Chuck 98 RT/10]

Should work for a small camera lens, right?

 

[Joseph Dell]

standard gauge pod size... should work for just about anything...

JD

 

[FLX109]

How do I order one? and can I get a boost guage setup (white guage) with it?