Who is running the most Nitrous on a creampuff ?

Catwood

Viper Owner
Joined
Aug 14, 2002
Posts
1,470
Reaction score
0
I ran a fairly big shot

I can look up the jet size later if your interested.

Carl
 

J DAWG

Enthusiast
Joined
Apr 9, 2002
Posts
2,238
Reaction score
0
Location
MS
only a 100 shot for wimps like me. :laugh:


TNT #39 nos and #22 fuel
 

Catwood

Viper Owner
Joined
Aug 14, 2002
Posts
1,470
Reaction score
0
I think I was a 55N 42P but need to confirm. Propane jet can only be so big.
 

VIPER006

Enthusiast
Joined
May 23, 2004
Posts
23
Reaction score
0
Location
Miami, FL
I am running an NX 200 shot on my creampuff. But I did finally end up going with colder plugs and a tighter gap. When the nitrous comes on it feels very strong now. Before, I had the same shot without changing the plugs or gap and did not feel the nitrous at all. The change was worth almost half a second in the quarter, 0.44 seconds to be exact. The only difference was the plugs' temp and gap. Hope the info helps.
 

J DAWG

Enthusiast
Joined
Apr 9, 2002
Posts
2,238
Reaction score
0
Location
MS
anyone getting misfire codes on 2001 or newer cars. Related to the colder plug?
 

Cudaman

Enthusiast
Joined
Oct 15, 2001
Posts
1,745
Reaction score
0
Location
USA
anyone getting misfire codes on 2001 or newer cars. Related to the colder plug?

John what brand of plug are you using and it's number?

Cudaman :usa:
 

VIPER006

Enthusiast
Joined
May 23, 2004
Posts
23
Reaction score
0
Location
Miami, FL
J Dawg

I had major misfire problems when I bought the car new. The first was at about 450 miles and was a 5 cyl. misfire. It happened about 3 times more after that. Not to drag on, it turned out to be my pcm. Once changed, never a problem again.

As far as the new colder plugs, not one issue. I am running NGK's, not sure on part #. But if anyone really wants to know tell me and I'll look at them, then post it.
 

J DAWG

Enthusiast
Joined
Apr 9, 2002
Posts
2,238
Reaction score
0
Location
MS
I am running the autolite 3923's as well. At cruising rpm's I will get code 300 and 302(cylinder 2). I need to pull the plug and look. Been too lazy thusfar to do so.


What are some other plugs people use?


John
 

Latest posts

Forum statistics

Threads
153,588
Posts
1,684,770
Members
18,149
Latest member
Lee95
Top